• Edge Connector Breakout Board for BBC micro:bit

This pre-built Edge Connector Breakout Board for the BBC micro:bit gives access to all the important pins on the bottom edge of the BBC micro:bit.

Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit.

This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.

The BBC micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.

To use the breakout board the BBC micro:bit should be inserted firmly into the connector as shown below:

Note:

  • This product is supplied with Straight Double Row PCB Pin Headers already soldered to the breakout board.

Features:

  • Features a dedicated pin strip for quick and easy prototyping.
  • Breaks out 21 pins from the edge of the BBC micro:bit.
  • Dedicated prototyping area with 3V and 0V rows.
  • Labelled pins and clear straightforward documentation.

Contents:

  • 1 x Edge Connector Breakout Board for the BBC micro:bit, Pre-built.

Dimensions:

  • Length: 60mm.
  • Width: 40mm.
  • Height: 11.8mm.

Requires:

  • 1 x BBC micro:bit.

Resources:

 

Write a review

Please login or register to review

Edge Connector Breakout Board for BBC micro:bit

  • Brand: Pimoroni
  • Product Code:PIM-MicroBit-Edge-Connector
  • Reward Points:7
  • Availability:Out Of Stock
  • रo 662.00

  • Price in reward points:662

  • 20 or more रo 657.00
  • 45 or more रo 651.00
  • 110 or more रo 646.00
  • 225 or more रo 641.00

Related Products

Micro:Bit - Single Board

Micro:Bit - Single Board

BBC micro:bit is a BBC initiative to get kids coding. A royalty from the sale of this BBC micro:bit ..

रo 1,986.00

Adafruit 4792 micro:bit or CLUE Connector - Sunken Right Angle Type

Adafruit 4792 micro:bit or CLUE Connector - Sunken Right Angle Type

The micro:bit isn't breadboard-friendly. That makes the 'bit durable and easy to manufacture but mea..

रo 318.00

Adafruit 1993 2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3/Pi 4

Adafruit 1993 2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3/Pi 4

This handy 2x20 IDC Box Header is the matching connector for our 40-pin GPIO Cable. By soldering thi..

रo 81.00

Tags: Edge, Connector, Breakout, Board, BBC, micro:bit

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments