The Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - the RP2040 - embedded on a robot controller board! The board comes with a 2-channel DC motor driver, 4 servo motor ports, 7 Grove I/O connectors, and lots of LEDs for troubleshooting and visual effects.

Features:

• A compact robot controller board with all the RP2040 goodness
• Controls 4x Servo motors
• Drives 2x DC motors with quick test buttons
• Built-in LiPo charger
• Auto power selection: USB 5V, LiPo (1-cell) or Vin (3.6-6v)
• Power on/off switch
• 7x Grove ports
• LEDs on 13x IO pin
• 2x RGB LEDs (Neopixel)
• Piezo buzzer with mute switch
• 2x push button

Specifications:

• Power Input Voltage (USB, LiPo or VIN): 3.6V to 6V
• Digital Input Voltage:
• Low Level: -0.3V to 0.8V
• High Level: 2.0 to 3.6V
• Digital Output Voltage:
• Low Level: 0 to 0.5V
• High Level: 2.6V to 3.3V
• Analog Input Voltage: 0 to 3.3V
• Vmotor (Only USB is connected) VUSB: 0.4V
• Vmotor (USB and LiPo are connected) VUSB: 0.4V
• Vmotor (USB and VIN are connected):
• VIN < VUSB: VUSB - 0.4V
• VIN > VUSB and VIN - VUSB < 0.6: VIN - 0.4V
• Maximum DC Motor Current
• Continuous: 1A
• Peak (< 5 seconds): 1.5A
• Operating Temperature: -20℃ to 85℃

Documents:

• maker pi rp2040 datasheet
• maker pi rp2040 example code

Warranty: 12 months

• Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.

Package Includes:

• 1 x MAKER PI RP2040