TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb!

Please note: This is the u.FL version of the TinyPICO USB-C. Click here for the PCB antenna version. TinyPICO V2 with Micro-B is still available over here!

The developers behind UnexpectedMaker have filled every nook on this board, packing a massive 700mA 3.3V regulator, onboard battery management, an RGB LED, 4MB of extra PSRAM, and 14 GPIO!

  • TinyPICO is tuned for ultra-low current use, dropping as low as 20uA when in deepsleep.
  • Optimized power path and power management: TinyPICO has been designed with two isolated power paths: a 5V path and a 3.3V path. Any components that are not needed for operation via battery or via the 3.3 V power pin are isolated within the 5V power path and are totally shut down when no USB cable is plugged in. In fact, even the power & charge LEDs are shut down when no 5 V power source is present.
  • Deep sleep has been optimized for all development platforms, and though they have seen it go as low as 10 uA, their official current rating in deep sleep is 20 uA.
  • Built-in USB-to-Serial converter chip may be CP210x based or CH9102F depending on chip availability.

TinyPICO includes an onboard APA102 RGB LED that has a quiescent current of 1 mA. Thankfully there is a solution for deep sleep. GPIO13 controls the power to the APA102 using a P-Channel MOSFET via a high-side switch that can (along with smoother IO settings) shut down the power to the APA102 for you. It’s essential to do this before going into deep sleep to ensure the lowest current draw possible.

UM has created some helper functions for you in their TinyPICO MicroPython & Arduino helper libraries to make this easy. Please check the code in the platform you use to understand how to shut down the APA102 correctly as just pulling GPIO13 high is not enough.


Technical Details:

  • If you are looking for technical support for an Unexpected Maker product, you can either use this form or join the discord server and post in the #um-hardware support channel, where you can get more real-time help from UM or other people on the server.

Documentation:

Package Includes:

  • 1 x Adafruit 5750 TinyPICO V3 USB-C with u.FL by Unexpected Maker 

Write a review

Please login or register to review

Adafruit 5750 TinyPICO V3 USB-C with u.FL by Unexpected Maker

  • Brand: Adafruit
  • Product Code:Ada-5750-TinyPICO-V3-USB-C
  • Reward Points:31
  • Availability:In Stock
  • रo 2,960.00

  • Price in reward points:3125

  • 45 or more रo 2,950.00

Related Products

Adafruit 5028 TinyPICO ESP32 Development Board with USB-C

Adafruit 5028 TinyPICO ESP32 Development Board with USB-C

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the pow..

रo 2,961.00

Adafruit 5749 ProS3 ESP32-S3 with u.FL by Unexpected Maker

Adafruit 5749 ProS3 ESP32-S3 with u.FL by Unexpected Maker

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board now with a u.FL connector instea..

रo 3,375.00

Adafruit 5748 FeatherS3 ESP32-S3 with u.FL by Unexpected Maker

Adafruit 5748 FeatherS3 ESP32-S3 with u.FL by Unexpected Maker

Introducing the FeatherS3 - The pro ESP32-S3 Development Board in the Feather Format now with a u.FL..

रo 3,035.00

Adafruit 5747 TinyS3 ESP32-S3 with u.FL by Unexpected Maker

Adafruit 5747 TinyS3 ESP32-S3 with u.FL by Unexpected Maker

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! Now with..

रo 2,700.00

Pimoroni Tiny 2040

Pimoroni Tiny 2040

A postage stamp sized RP2040 development board with a USB-C connection, perfect for portable project..

रo 1,134.00

Tags: Adafruit, TinyPICO, USB-C

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments