* 8051 Development Board with inbuilt programmer.
* On board Voltage Regulator with filters and operating voltage- 5V to 12V.
* DB-9 connector to connect with the serial port of the computer(UART communication).
* On Board IN-circuit programmer consisting AT89C2051 and MAX232.
* 11.0592 MHz Crystal Oscillator for clock pulsing.
* In built motor driving circuitry (4 DC / 2 Stepper motor).
* 2 pin connector to connect the Power Supply.
* Red Led as Power Indicator.
* Green Led as Programming Indicator.
* A reset switch.
* A jumper to toggle between Programming circuit and Reset circuit.
* All ports accessible through Male Header Pins.