The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:

Instead of a L293D darlington driver, we now have the TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time). It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.

Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.

Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.

Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. And the shield is assembled and tested here at Adafruit so all you have to do is solder on straight or stacking headers and the terminal blocks.

Lets check out these specs again:

  • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A for brief 20ms peaks) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Motors automatically disabled on power-up
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Arduino reset button brought up top
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • Tested compatible with Arduino UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.
  • Download the easy-to-use Arduino software library, check out the examples and you're ready to go!

Comes with an assembled & tested shield, terminal block, plain header, jumper. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time. Arduino and motors are not included but we have lots of motors in the shop and all our hobby servos, DC motors, and stepper motors work great.

Technical Details:

  • Dimensions, assembled: 70mm x 55mm x 10mm 2.7"x2.1"x0.4"
  • This board/chip uses I2C 7-bit addresses between 0x60-0x80, selectable with jumpers.

Datasheet for the motor driver chip

 

Write a review

Please login or register to review

Adafruit 1438 / 81 Motor/Stepper/Servo Shield for Arduino v2 Kit - v2.3 / v1.2

  • Product Code:Ada-Motor-Shield-Kit-2-3
  • Reward Points:23
  • Availability:In Stock
  • रo 2,153.00

  • Price in reward points:2271

  • 60 or more रo 2,144.00

Available Options


Related Products

DC Motor 37mm, 12V/ 50RPM

DC Motor 37mm, 12V/ 50RPM

Metal geared DC motor and bracket from Makeblock now available in India! Specification: ..

रo 1,985.00

Stepper Motor- 42BYG

Stepper Motor- 42BYG

Makeblock 42BYG High quality Step Motor now available in India! The 42BYG step motor can be used..

रo 2,585.00

TowerPro MG-945 Digital High Speed Servo

TowerPro MG-945 Digital High Speed Servo

High-speed yet dead-accurate. A servo with digital control.   Specifications: Dimens..

रo 811.00

TowerPro MG-946R Digital High Speed Servo

TowerPro MG-946R Digital High Speed Servo

The premium-end, high speed and super accurate digital servo from the house of TowerPro.    ..

रo 776.00

TowerPro MG-995 Digital Metal Gear Servo

TowerPro MG-995 Digital Metal Gear Servo

High-speed yet dead-accurate. A servo with digital control for precise maneuver.   Specifica..

रo 370.00

TowerPro MG-996R Digital Metal Gear Servo

TowerPro MG-996R Digital Metal Gear Servo

The premium-end, high speed and super accurate digital servo from the house of TowerPro.   ..

रo 630.00 रo 850.00

Stepper Motor Bracket 42BYG

Stepper Motor Bracket 42BYG

42BYG Stepper Motor Bracket from Makeblock Made from 6061 aluminum extrusion , 3mm thick, an..

रo 885.00

DC Motor 32mm, 12V/ 10RPM

DC Motor 32mm, 12V/ 10RPM

DC motors can be defined as an extension of DC motor which already had its Insight details demystifi..

रo 172.00

Gravity: Dual Bipolar Stepper Motor Shield for Arduino - DRV8825

Gravity: Dual Bipolar Stepper Motor Shield for Arduino - DRV8825

Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an ..

रo 2,977.00 रo 3,430.00

DRS - 0101 HerkuleX Smart Servo

DRS - 0101 HerkuleX Smart Servo

Herkulex DRS-0101 is state of the art modular smart servos incorporating motor, gear reducer, contro..

रo 6,993.00 रo 8,059.00

Adafruit 5483 ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Adafruit 5483 ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

We've got a new machine here at Adafruit, it can uncover your deepest desires. Don't believe me? I'l..

रo 2,693.00

Adafruit 2305 DRV2605L Haptic Motor Controller - STEMMA QT / Qwiic

Adafruit 2305 DRV2605L Haptic Motor Controller - STEMMA QT / Qwiic

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC mo..

रo 858.00

Adafruit 3190 DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Adafruit 3190 DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver..

रo 717.00 रo 809.00

Adafruit 2448 TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Adafruit 2448 TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per ..

रo 665.00 रo 750.00

Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board

Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board

Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the D..

रo 569.00 रo 642.00

Adafruit 3243 Assembled DC Motor + Stepper FeatherWing Add-on

Adafruit 3243 Assembled DC Motor + Stepper FeatherWing Add-on

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assemble..

रo 2,320.00

Tags: Motor, Shield, Kit, DC Motor, Stepper, Servo

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments