Our regular DigiOne has no equal.
In our quest for digital perfection we asked how we can improve the design and give you the ultimate DigiOne.

First, we decided to use more board space (we are using 2 boards), the PCB area increased 220%. First board is the “dirty side” and top board has the “clean side”. With the extra space, we used the best decoupling capacitors (film) on everything that’s important (clocks, buffers, flip flops). Also, with this extra space we added a supercap on the “clean side” so most of the electrons come from this onboard “buffer” (there is so much power onboard that DigiOne Sig can run a few seconds without any power attached to the clean side).

We also decided to use 2 power supplies. The “dirty power” needs 5V /2-3A (RPI power). The “clean side” needs about 100mA and accepts from 5V to 6V. You can use anything on it, linear power supply or pure batteries power.

Thirdly, we changed the clocks to the latest from NDK (ultralow jitter SDA) that have lower phase noise than the previous generation.

REMEBER!
The Digione Signature needs 2 PSUs to run.
You can purchase 1 x 5V 3A PSU, Shanti or Nirvana to feed the dirty side.
We strongly recommend you purchase the battery pack or use a very good power supply for the clean side.

If you want to use the Digione Signature right away, you can purchase an additional 5V PSU from us, but we dont recommend this set up.

Features:
  • It’s a "re-clocker". The unit has its own clocks so it does not rely on the jittery RPI clocks
  • It's galvanically isolated. The clean board is isolated (ground and signals) from the dirty side
  • It needs 2 PSUs, one for 5V/2A-3A (RPI) and a second power 5V to 6V 100mA. We do recommend the cleanest power supply possible (batteries, linear but even a good SMPS will work)
  • Old driver is compatible for both units (chose DigiOne on your favorite player)
  • Measured jitter has decreased further, less than 400fs (tested at buffer)
  • Output is coaxial/BNC and rise/fall time is 1ns and voltage level is exactly as per guidelines (550mV on coaxial) measured at end of transmitting cables
  • DigiOne Signature Power Inputs
Documents:
Package Includes:
  • 1 x DIGIONE SIGNATURE
  • 2 x DC to Type C Adapter Cables

Write a review

Please login or register to review

DIGIONE SIGNATURE

  • Brand: Allo
  • Product Code:Allo-DIGIONE-SIGNATURE
  • Reward Points:126
  • Availability:In Stock
  • रo 12,673.00

  • Price in reward points:12673

Available Options


Related Products

DIGIONE (EU)

DIGIONE (EU)

Basically you have your music on the cloud or on your PC/NAS. If it’s on the cloud , you will use yo..

रo 5,751.00 रo 6,930.00

DIGIONE PLAYER - 16GB

DIGIONE PLAYER - 16GB

Features:Player includes: RPI 3 B+ / RPi 4 2GB/4GB , DigiOne, Acrylic Case case, 16GB microSD cardCa..

रo 9,765.00

Allo Battery Pack Holder

Allo Battery Pack Holder

This battery pack holder can hold up to 4 x LIFEPO 18650 batteries and has a DC jack with a 2.5mm pi..

रo 150.00 रo 333.00

DIGIONE SIGNATURE PLAYER

DIGIONE SIGNATURE PLAYER

The Digione Signature Player comes fully assembled and ready to use with the options you selected. ..

रo 20,125.00

Allo Shanti - Dual Linear Ultra Low Noise PSU

Allo Shanti - Dual Linear Ultra Low Noise PSU

Music and linear power supply have been always a good match. The main problems of LPS is extremely i..

रo 8,193.00

USBridge Signature

USBridge Signature

USBridge Sig was build using RPI compute module so from a software point of view, this will give you..

रo 12,680.00

ACRYLIC CASE FOR RPI + DIGIONE SIGNATURE

ACRYLIC CASE FOR RPI + DIGIONE SIGNATURE

This is the case for Raspberry Pi and DigiOne Signature   Features : Acrylic Ca..

रo 611.00

BNC To RCA Adapter

BNC To RCA Adapter

Gold plated Brass BNC to RCA adapter. Works with our DigiOne Package Includes : 1 x BNC TO R..

रo 263.00

DC Barrel Adapter

DC Barrel Adapter

DC barrel adapter to be used with our DigiOne Signature / Player and KATANA / Player.   Feat..

रo 60.00

Tags: DIGIONE, SIGNATURE, Nirvana, Shanti

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments