Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.
 
This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi module with all the extras you need, ready to rock! We have other boards in the Feather family, check'em out here.
 
At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a high-quality SiLabs CP2104 USB-Serial chip that can upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings. The CP2104 has better driver support than the CH340 and can do very high speeds without stability issues.
 
To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.
 
Here's some handy specs!
 
Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
Light as a (large?) feather - 9.7 grams
ESP8266 @ 80MHz with 3.3V logic/power
4MB of FLASH (32 MBit)
Built in WiFi 802.11 b/g/n
3.3V regulator with 500mA peak current output
CP2104 USB-Serial converter onboard with 921600 max baudrate for speedy uploading
Auto-reset support for getting into bootload mode before firmware upload
9 x GPIO pins - can also be used as I2C and SPI
1 x analog inputs 1.0V max
Built in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger
Pin #0 red LED for general purpose blinking. Pin #2 blue LED for bootloading debug & general purpose blinking
Power/enable pin
4 mounting holes
Reset button
Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua (it comes preprogrammed with the Lua interpreter). You have the option to get this either unsoldered, or assembled with headers pre-soldered. Lipoly battery and USB cable not included (but we do have lots of options in the shop if you'd like!)
 
 
TECHNICAL DETAILS

Write a review

Please login or register to review

Adafruit 2821/ 3046/ 3213 Feather HUZZAH with ESP8266 WiFi

  • Brand: Adafruit
  • Product Code:Ada-Feather-Huzzah-ESP8266
  • Reward Points:19
  • Availability:In Stock
  • रo 1,829.00
  • रo 1,621.00

  • Price in reward points:1930

  • 50 or more रo 1,601.00
  • 80 or more रo 1,595.00

Available Options


Related Products

Adafruit 4172 HUZZAH32 – ESP32 Breakout Board

Adafruit 4172 HUZZAH32 – ESP32 Breakout Board

Squeeeeze down your next ESP32 project to its bare-bones essential with the Adafruit HUZZAH32 Breako..

रo 1,455.00

Adafruit 4065 ESP8285 SMT Module - ESP8266 with 1MB FLASH - ESP-M2

Adafruit 4065 ESP8285 SMT Module - ESP8266 with 1MB FLASH - ESP-M2

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you ..

रo 594.00

WiFi Serial Transceiver Module - ESP8266 Development Kit

WiFi Serial Transceiver Module - ESP8266 Development Kit

 WiFi Serial Transceiver Module - ESP8266 Development Kit Tutorial The password for con..

रo 520.00

ESP8266 Wifi Bee (Arduino Compatible)

ESP8266 Wifi Bee (Arduino Compatible)

Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBE..

रo 538.00 रo 620.00

Adafruit 3315 TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers - V2

Adafruit 3315 TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers - V2

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather proj..

रo 3,772.00

Adafruit 3133 Ultimate GPS FeatherWing

Adafruit 3133 Ultimate GPS FeatherWing

Give your Feather a sense of place, with an Ultimate GPS FeatherWing.This FeatherWing plugs right in..

रo 2,693.00

Wio Lite MG126 - Wireless Development Board

Wio Lite MG126 - Wireless Development Board

The Wio Lite MG126 is a cost-effective Arduino compatible board with MG126 Bluetooth Module. SAM D21..

रo 1,160.00

Adafruit 3574 Feather nRF52 Pro with myNewt Bootloader - nRF52832

Adafruit 3574 Feather nRF52 Pro with myNewt Bootloader - nRF52832

The Adafruit Feather nRF52 Pro is another Bluetooth Low Energy board for advanced projects and users..

रo 2,968.00

Adafruit 2999 ATWINC1500 WiFi Breakout

Adafruit 2999 ATWINC1500 WiFi Breakout

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 8..

रo 2,693.00

Adafruit 5862 Grove and Stemma QT FeatherWing for all Feathers

Adafruit 5862 Grove and Stemma QT FeatherWing for all Feathers

The Adafruit Grove and Stemma QT FeatherWing for all Feathers allows folks to use many Grove devices..

रo 534.00

Adafruit 4382 Feather STM32F405 Express

Adafruit 4382 Feather STM32F405 Express

ST takes flight in this Feather board. The new STM32F405 Feather that we designed runs CircuitPython..

रo 4,312.00

Adafruit 4753 Icarus IoT Board V2  nRF9160

Adafruit 4753 Icarus IoT Board V2 nRF9160

The Icarus is a cost-effective cellular IoT board built around Nordic Semi's nRF9160 modem and combi..

रo 17,539.00

Adafruit 6000 Feather RP2350 with HSTX Port

Adafruit 6000 Feather RP2350 with HSTX Port

RP2350 flies high with the Feather format - now you can use any FeatherWings with this battery-power..

रo 1,349.00

Tags: Adafruit, Feather, HUZZAH, ESP8266, WiFi, 3404, 2821, 3046, 3213

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments