Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell Adalogger is in stock and ready to assist your Raspberry Pi Pico and Pico W project with handy hardware and datalogging.
  • The PiCowbell Adalogger is the same size and shape as a Pico and is intended to socket underneath to make your next data logging or data reading project super easy. Micro SD card socket? Yes! STEMMA QT / Qwiic connector for fast I2C? Indeed. Real Time Clock with battery backup for accurate timekeeping? Of course!

Please Note! There are a lot of possible configurations, and we stock various headers depending on how you want to solder and attach. Especially if you want the Pico on top so that the BOOTSEL button and LED are accessible.

  1. Use the Pico Stacking Headers if you want to be able to plug into a breadboard or other accessory with sockets.
  2. Use the Pico Socket Headers if you want to plug directly in and have a nice solid connection that doesn't have any poking-out-bits.
  3. Use the Short Socket Headers for a very slim but pluggable design; note that you'll want to trim down the Pico's headers or use the short plug headers on the Pico to have a skinny sandwich.
  4. Solder the PCB directly to the Pico headers - of course, this is very compact and inexpensive, but you won't be able to remove the PiCowbell.
The PiCowbell Adalogger provides you with:

  • Right angle JST SH connector for I2C / Stemma QT / Qwiic connection. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)
  • MicroSD card holder for adding as much storage as you could possibly want for reading or writing. Connected to SPI pins 16, 18, 19 and card select on 17. Optional card detect line can be connected to pin 15.
  • PCF8523 Real Time Clock with CR1220 Coin cell backup for many years of timekeeping. Set the time once using our example sketches and then you can data-log with accurate timestamps. Uses I2C.
  • Reset button - Press to restart your program
  • Many pads on the Adalogger has a duplicate hole pad next to it for solder-jumpering
  • The ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button
  • Gold-plated pads for easy soldering
If using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins.
Does not come with a micro SD card or a coin cell battery. A CR1220 coin cell is required to use the RTC battery-backup capabilities! We don't include one by default to make shipping easier for those abroad, but we do stock them, so pick one up or use any CR1220 you have handy.
Technical Details:
  • Product Dimensions: 52.0mm x 20.3mm x 6.0mm / 2.0" x 0.8" x 0.2"
Package Includes:
  • 1 x Adafruit 5703 PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT

Write a review

Please login or register to review

Adafruit 5703 PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT

  • Brand: Adafruit
  • Product Code:Ada-5703-PiCowbell-Adalogger-Pico
  • Reward Points:9
  • Availability:In Stock
  • रo 858.00

  • Price in reward points:905

  • 45 or more रo 750.00
  • 180 or more रo 748.00

Related Products

Adafruit 2796 Feather M0 Adalogger

Adafruit 2796 Feather M0 Adalogger

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and let..

रo 1,908.00 रo 2,153.00

Adafruit 2922 Adalogger FeatherWing RTC+SD Add-on For All Feather Boards

Adafruit 2922 Adalogger FeatherWing RTC+SD Add-on For All Feather Boards

A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger Feat..

रo 966.00

Adafruit 5728 PiCowbell CAN Bus for Pico - MCP2515 CAN Controller

Adafruit 5728 PiCowbell CAN Bus for Pico - MCP2515 CAN Controller

Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell C..

रo 1,350.00

Adafruit 5200 PiCowbell Proto for Pico - Reset Button & STEMMA QT

Adafruit 5200 PiCowbell Proto for Pico - Reset Button & STEMMA QT

Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell P..

रo 210.00

Adafruit 5905 Proto Under Plate PiCowBell for Pico - Reset Button & STEMMA QT

Adafruit 5905 Proto Under Plate PiCowBell for Pico - Reset Button & STEMMA QT

The Adafruit Proto Under Plate PiCowBell is intended to be treated like a mini solder-less proto pla..

रo 486.00

Adafruit 5906 Proto Doubler PiCowbell for Pico and PicoW

Adafruit 5906 Proto Doubler PiCowbell for Pico and PicoW

The Adafruit Proto Doubler PiCowBell is intended to be treated like a mini solder-less proto plate t..

रo 809.00

Adafruit 5907 Terminal PiCowbell for Pico with Pre-Soldered Sockets - Reset Button & STEMMA QT

Adafruit 5907 Terminal PiCowbell for Pico with Pre-Soldered Sockets - Reset Button & STEMMA QT

Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit Terminal Pi..

रo 1,349.00

Adafruit 5904 Terminal PiCowbell for Pico - Reset Button & STEMMA QT

Adafruit 5904 Terminal PiCowbell for Pico - Reset Button & STEMMA QT

Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit Terminal Pi..

रo 1,241.00

Adafruit 5967 Proto Tripler PiCowbell for Pico and PicoW

Adafruit 5967 Proto Tripler PiCowbell for Pico and PicoW

The Adafruit Proto Tripler PiCowBell is intended to be treated like a mini solder-less proto plate t..

रo 1,074.00

Adafruit 5980 Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT / Qwiic

Adafruit 5980 Feather RP2040 Adalogger - 8MB Flash with microSD Card - STEMMA QT / Qwiic

This is the Adafruit Feather RP2040 Adalogger - our take on an 'all-in-one' RP2040 data-logger (or d..

रo 1,614.00

Tags: Adafruit, PiCowbell, Adalogger, Pico, MicroSD, RTC, STEMMA QT

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments