• Adafruit 3653 WINC1500 WiFi Shield with PCB Antenna
  • Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it).

    The Adafruit ATWINC1500 WiFi Shield uses SPI to communicate plus some GPIO for control, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works best with SAMD21-based boards like the Arduino Zero or Metro M0 Express, or the Arduino Mega. It works OK on Uno but uses nearly all the memory so it may be a challenge to build complex projects. It will not work/fit on other Arduinos such as 32u4-based or attiny-based boards. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.

    This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support! This version of the shield comes with a built in PCB antenna. 

    These SPI-protocol WiFi module are currently the best way to add WiFi to your Arduino-compatible so we've decided to make a handy shield for it. The shield comes with level shifting on all the input pins so you can use it with 3V or 5V logic boards. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.

    We also tossed on a micro SD card socket, you can use that to host or store data you get from the Internet. Arduino's based on the ATmega328 (like the UNO) cannot use both the WiFi module and SD library at the same time, they're too small. Upgrade to a Metro M0 Express to get a big memory bump!

  • TECHNICAL DETAILS

    Product Dimensions: 68.0mm x 53.0mm x 4.7mm / 2.7" x 2.1" x 0.2"

    Product Weight: 13.7g / 0.5oz

 

Write a review

Please login or register to review

Adafruit 3653 WINC1500 WiFi Shield with PCB Antenna

  • Brand: Adafruit
  • Product Code:Ada-WINC1500-WiFi-Shield-PCB-Antenna
  • Reward Points:28
  • Availability:In Stock
  • रo 2,693.00

  • Price in reward points:2841

  • 50 or more रo 2,357.00
  • 60 or more रo 2,347.00

Related Products

Wifi Shield for Arduino - ESP8266 Based

Wifi Shield for Arduino - ESP8266 Based

  ESP8266 ESP12E based Wifi Shield for Arduino...

रo 290.00 रo 500.00

Adafruit 1272 Ultimate GPS Logger Shield - Includes GPS Module

Adafruit 1272 Ultimate GPS Logger Shield - Includes GPS Module

Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shiel..

रo 3,232.00

ESP32-C3-MINI-1-N4 Module (PCB antenna)

ESP32-C3-MINI-1-N4 Module (PCB antenna)

ESP32-C3-Mini-1 is a universal Wi-Fi and low power Bluetooth LE module. The rich set of peripherals ..

रo 418.00 रo 482.00

Adafruit 5100 MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLED

Adafruit 5100 MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLED

Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called ..

रo 3,772.00

ESP32 S3 WROOM-1 N4 Module (PCB Antenna)

ESP32 S3 WROOM-1 N4 Module (PCB Antenna)

ESP32-S3-WROOM-1 is a powerful, generic Wi-Fi+ Bluetooth LE MCU module built around the ESP32-S3 ser..

रo 347.00 रo 399.00

Adafruit 5670 / 5671 ESP32-C6-WROOM-1-N8 Engineering Module - 4 MB / 8 MB Quad SPI Flash - PCB Antenna

Adafruit 5670 / 5671 ESP32-C6-WROOM-1-N8 Engineering Module - 4 MB / 8 MB Quad SPI Flash - PCB Antenna

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5..

रo 398.00

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 8..

रo 2,693.00

Tags: Adafruit, WINC1500, WiFi, Shield, PCB, Antenna

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments