So thin. So mini. So teeeeeeny-tiny. It's the 'skinny' version of our classic NeoPixel strips!

These NeoPixel strips have 30 digitally-addressable pixel Mini LEDs per meter and are only 7.5mm wide, 5mm if you remove the strip from the casing. This is the strip with black flex PCB, it's identical to the white 30 LED/meter except it has a different color mask on the flex strip

There are some things to watch for:

  • These LED's use about 9.5 Watts max (~2 Amps @ 5V) per meter. The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as our 5V 2A or 10A supply is key!
  • Second, to get high density, the controller chip is inside the LED, which is kind of cool, but also means that the chip only uses a single pin for input and a single pin for output. The protocol used is very very timing-specific and can only be controlled by microcontrollers with highly repeatable 100nS timing precision. We have example code for using with the Arduino Uno/Mega microcontroller at 8MHz and 16MHz, and with a little effort you can use with the Raspberry Pi, or Beagle Bone Black, but it will not work with the Basic Stamp, NETduino, any other interpreted/virtual machine microprocessor or any processor slower than 8 MHz. For those processors, check our DotStar digital LED strip which has SPI-like input/output and works easily with Pi, NETduino, and other processors.
  • The way the pixels are controlled by an Arduino, the entire strip must be buffered in memory, and we've found many Arduino UNO projects only have about 1500bytes of RAM available after all the extras are included - enough for about 500 LED pixels. If you want to drive the entire strip and have some other libraries included, you may need to use a Mega.

There are 30 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you

The strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 1.27"/32.5mm (1 LED each). Solder to the 0.1" copper pads and you're good to go. Of course, you can also connect strips together to make them longer, just watch how much current you need! We have a 5V/2A supply that should be able to drive 1 meter and a 5V/10A supply that can drive up to 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip

These come in 5 meter reels with a 2 or 3-pin JST SM connector on each end and separated power/ground wires. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with two connectors. If you buy less than 5m, you'll get a single strip, but it will be a cut piece from a reel which may or may not have a connector on it.

To wire up these strips we suggest picking up a 2.1mm DC jack to wire in so you can connect one of our wall adapters to power it. For the data + ground pins, you can pick up 2-pin JST set to turn it into a quick connection.

 

TECHNICAL DETAILS

  • 7.5mm (0.3") wide, 4mm (0.16") thick with casing on, 16mm (0.63") long per segment
  • 30 LEDs per meter
  • Removable IP65 weatherproof casing
  • Maximum 5V @ 60mA draw per 1.3" strip segment (all LEDs on full brightness)
  • 5VDC power requirement (do not exceed 6VDC) - no polarity protection
  • 1 integrated RGB LEDs per segment, individually controllable
  • LED wavelengths: 630nm/530nm/475nm
  • Connector: 2-pin JST SM

 

Write a review

Please login or register to review

Adafruit 2949/2954/2959/2964/2969/2970 Mini Skinny NeoPixel Digital RGB LED Strip

  • Brand: Adafruit
  • Product Code:Ada-Mini-Skinny-NeoPixel-Digi-RGB-LED-Strip
  • Reward Points:19
  • Availability:In Stock
  • रo 1,829.00

  • Price in reward points:1930

  • 50 or more रo 1,601.00
  • 85 or more रo 1,595.00

Available Options


Related Products

Adafruit 2871 / 2872 / 2870 NeoPixel NeoMatrix 64 RGBW

Adafruit 2871 / 2872 / 2870 NeoPixel NeoMatrix 64 RGBW

Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGBW LEDs adorn the NeoM..

रo 4,851.00

Adafruit 3636 NeoPixel LED Side Light Strip

Adafruit 3636 NeoPixel LED Side Light Strip

Fancy new side light LED strips are a great alternative for folks who have loved and used Adafruit L..

रo 1,696.00

Adafruit 2552 / 2538 / 2508 / 2541 / 1506 / 1507 NeoPixel Digital RGB LED Strip - 1 Meter

Adafruit 2552 / 2538 / 2508 / 2541 / 1506 / 1507 NeoPixel Digital RGB LED Strip - 1 Meter

These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and..

रo 1,829.00

Adafruit 4548 / 4549 RGBW Neon-like LED Flex Strip -1 meter

Adafruit 4548 / 4549 RGBW Neon-like LED Flex Strip -1 meter

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were..

रo 2,968.00

Adafruit 2868 / 2869 / 2867 NeoPixel Stick - 8 x 5050 RGBW LEDs

Adafruit 2868 / 2869 / 2867 NeoPixel Stick - 8 x 5050 RGBW LEDs

The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a..

रo 858.00

Adafruit 1655 NeoPixel 5050 RGB LED with Integrated Driver Chip - 10 Pack

Adafruit 1655 NeoPixel 5050 RGB LED with Integrated Driver Chip - 10 Pack

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip ..

रo 486.00

Adafruit 5646 5x5 NeoPixel Grid BFF Add-On for QT Py and Xiao

Adafruit 5646 5x5 NeoPixel Grid BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of powe..

रo 1,074.00

Adafruit 5645 NeoPixel Driver BFF Add-On for QT Py and Xiao

Adafruit 5645 NeoPixel Driver BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of powe..

रo 426.00

QUINLED DIG2GO PORTABLE DIGITAL LED CONTROLLER

QUINLED DIG2GO PORTABLE DIGITAL LED CONTROLLER

Easiest to use ESP32 based digital LED yet - small enough to take on the road!Control your digital L..

रo 4,116.00

Adafruit 3869 NeoPixel RGB Neon-like LED Flex Strip with Silicone Tube - 1 meter

Adafruit 3869 NeoPixel RGB Neon-like LED Flex Strip with Silicone Tube - 1 meter

No joke, we have been looking for this exact product for over 5 years, and we've finally got the per..

रo 3,772.00

Tags: Adafruit, Mini, Skinny, NeoPixel, Digital, RGB, LED, Strip 2949, 2954 2959 2964 2969 2970

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments