• Breathe easy - we finally have an I2C VOC/eCO2 sensor. Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. This sensor from AMS is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and is intended for indoor air quality monitoring. When connected to your microcontroller (running our library code) it will return a Total Volatile Organic Compound (TVOC) reading and an equivalent carbon dioxide reading (eCO2) over I2C. There is also an onboard thermistor that can be used to calculate the local ambient temperature.

    The CCS811 has a 'standard' hot-plate MOX sensor, as well as a small microcontroller that controls power to the plate, reads the analog voltage, and provides an I2C interface to read from.

    This part will measure eCO2 (equivalent calculated carbon-dioxide) concentration within a range of 400 to 8192 parts per million (ppm), and TVOC (Total Volatile Organic Compound) concentration within a range of 0 to 1187 parts per billion (ppb). According to the fact sheet it can detect Alcohols, Aldehydes, Ketones, Organic Acids, Amines, Aliphatic and Aromatic Hydrocarbons. We include a 10K NTC thermistor with matching balancing resistor which can be read by the CCS811 to calculate approximate temperature.

    Please note, this sensor, like all VOC/gas sensors, has variability and to get precise measurements you will want to calibrate it against known sources! That said, for general environmental sensors, it will give you a good idea of trends and comparisons.Also, AMS recommends that you run this sensor for 48 hours when you first receive it to "burn it in", and then 20 minutes in the desired mode every time the sensor is in use. This is because the sensitivity levels of the sensor will change during early use. Finally, this chip uses I2C clock stretching, and some microcontrollers/computers don't support that (e.g. Raspberry Pi)

    The CCS811 has a configurable interrupt pin that can fire when a conversion is ready and/or when a reading crosses a user-settable threshold. The CCS811 supports multiple drive modes to take a measurement every 1 second, every 10 seconds, every 60 seconds, or every 250 milliseconds.

    For your convenience we've pick-and-placed the sensor on a PCB with a 3.3V regulator and some level shifting so it can be easily used with your favorite 3.3V or 5V microcontroller.

    We've also prepared software libraries to get you up and running in Arduino IDE or CircuitPython with just a few lines of code! Check out our tutorial for more information!

  • TECHNICAL DETAILS

    Product Dimensions: 21.0mm x 18.0mm x 3.0mm / 0.8" x 0.7" x 0.1"

    Product Weight: 1.2g / 0.0oz

 

Write a review

Please login or register to review

Adafruit 3566 CCS811 Air Quality Sensor Breakout - VOC and eCO2

  • Brand: Adafruit
  • Product Code:Ada-CCS811-Air-Quality-Sensor-Breakout
  • Reward Points:20
  • Availability:In Stock
  • रo 1,985.00
  • रo 1,905.00

  • Price in reward points:1985

Related Products

Gas Sensor LPG - MQ-6

Gas Sensor LPG - MQ-6

The MQ-6 sensor detects the Liquid petroleum Gas which is mostly composed of propane and butane conc..

रo 90.00 रo 134.00

Gas Sensor Natural - MQ-5

Gas Sensor Natural - MQ-5

The MQ-5 sensor detects the LPG, Natural gas, Town gas aka coal gas, ranging from 100 - 3000ppm...

रo 111.00

Gas Sensor Methane CNG - MQ-4

Gas Sensor Methane CNG - MQ-4

The MQ-4 sensor detects the CH4, CNG gas ranging from 200 - 10000ppm...

रo 145.00

Breakout Board for MQ Gas Sensors

Breakout Board for MQ Gas Sensors

This breakout board is designed to work with any of the MQ-series gas sensors, simplifying the inter..

रo 119.00

Adafruit 5606 ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade - STEMMA QT / Qwiic

Adafruit 5606 ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade - STEMMA QT / Qwiic

do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital..

रo 2,370.00

Gas Sensor Smoke - MQ-2

Gas Sensor Smoke - MQ-2

The MQ-2 sensor is suitable for liquefied gas, butane, propane, methane, alcohol, hydrogen, smoke an..

रo 106.00

Gas Sensor Alcohol - MQ-3

Gas Sensor Alcohol - MQ-3

Gas Sensor Alcohol - MQ-3   - Sensitive material of MQ-3 gas sensor is SnO2, which with lowe..

रo 185.00

Adafruit 3199 MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout

Adafruit 3199 MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout

Give your next sensor project a nose for gasses with the Adafruit MiCS-5524 Gas Sensor Breakout. Thi..

रo 1,614.00

Adafruit 3686 PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003

Adafruit 3686 PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 ..

रo 4,312.00

Gravity: Analog CO2 Gas Sensor For Arduino

Gravity: Analog CO2 Gas Sensor For Arduino

Note: The latest Version is available:Gravity: Analog Electrochemical Carbon Dioxide Sensor (0-10000..

रo 4,496.00 रo 5,109.00

Air Quality Sensor : MQ135 for Arduino

Air Quality Sensor : MQ135 for Arduino

Features: The main chip:  MQ135 gas sensing probe Operating voltage:  DC 5V ..

रo 162.00

Gravity: Air Quality Sensor - CCS811

Gravity: Air Quality Sensor - CCS811

Gravity: CCS811 Air Quality Sensor can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Or..

रo 1,183.00 रo 1,364.00

Adafruit 4632 PMSA003I Air Quality Breakout - STEMMA QT / Qwiic

Adafruit 4632 PMSA003I Air Quality Breakout - STEMMA QT / Qwiic

Breathe easy, knowing that you can track and sense the quality of the air around you with this Adafr..

रo 4,851.00

Tags: Adafruit, CCS811, Air, Quality, Sensor, Breakout, VOC, eCO2

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments