I2C stands for Inter-Integrated-Circuit communications, its meant for short distances on a PCB or subassembly. But, we're engineers and we like to push the limits of technology, Well, if you try to do that you'll quickly find that the length of the cable adds capacitance and resistance that slows down the open-drain pullups used in I2C, making it hard to use 100KHz+ clock speeds. You could try slowing down your I2C clock to 1 KHz Using this board is easy: connect it to your I2C bus at the beginning of the chain (if you don't have a massively long cable, you can also try at the end of the chain). When the chip is powered and enabled, it will watch the SCL and SDA lines. When it sees them being pulled up through the I2C resistors, it will activate and dump in some current to give it a boost thru to the top power rail.
 
You can now achieve much faster data rates without having to noodle with resistors, and over long cables. We ran a 400 KHz OLED over 3 meters of phone wire with ease. With a 100KHz signal, we even ran a BME680 over 100 feet of Ethernet and had an OLED display the sensor details.
Runs with any bus voltage, from 1.6V to 5.5V and up to 400 KHz SCL speed, with cables up to 4000pF. No special firmware, software, or configuration required. Simply plug the power, ground, SCL and SDA connectors into your bus and watch as your rise times magically turn sawtooths into square waves.To get you going fast, we spun up a custom made PCB in the STEMMA QT form factor, making it easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors.
 

Features & Specifications:
  • Improves I2C Bus Rise Time Transition
  • Ensures Data Integrity with Multiple Devices on the I2C Bus.
  • Wide Supply Voltage Range: 1.6V to 5.5V
  • Improves Low State Noise Margin
  • Up to 400kHz Operation
  • Auto Detect Low Power Standby Mode
  • Low (<5μA) Supply Current Shutdown
  • Does Not Load Bus When Disabled or Powered Down
  • Strong Slew Limited Pull-up Current
  • ±8kV Human Body Model ESD Ruggedness
Package Includes:
  • 1 x Adafruit Extender / Active Terminator

Write a review

Please login or register to review

Adafruit 4756 LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic

  • Brand: Adafruit
  • Product Code:Ada-4756-Terminator
  • Reward Points:8
  • Availability:In Stock
  • रo 809.00

  • Price in reward points:854

  • 50 or more रo 708.00
  • 190 or more रo 705.00

Related Products

Adafruit 4328 JST SH 4-pin Vertical Connector  - Qwiic Compatible (STEMMA connectors) Pack of 10

Adafruit 4328 JST SH 4-pin Vertical Connector - Qwiic Compatible (STEMMA connectors) Pack of 10

If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a..

रo 426.00

Adafruit 3709 SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

Adafruit 3709 SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

This is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and H2 and is..

रo 1,889.00

Adafruit 5374 ADXL375 - High G Accelerometer (+-200g) with I2C and SPI - STEMMA QT / Qwiic

Adafruit 5374 ADXL375 - High G Accelerometer (+-200g) with I2C and SPI - STEMMA QT / Qwiic

Hey rocket man (burnin' out your fuse out there alone) ever wonder how fast you're rocketing? The Ad..

रo 2,693.00

Adafruit 5545 PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Adafruit 5545 PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable ..

रo 534.00

Adafruit 5146 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT

Adafruit 5146 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT

If you want to store calibration values, MAC addresses, non-secure access tokens, or other unique id..

रo 426.00

Adafruit 5159 TCA4307 Hot-Swap I2C Buffer with Stuck Bus Recovery - STEMMA QT / Qwiic

Adafruit 5159 TCA4307 Hot-Swap I2C Buffer with Stuck Bus Recovery - STEMMA QT / Qwiic

As we've been adding  STEMMA QT connectors to our breakouts and dev boards, folks have been rea..

रo 534.00

Adafruit 5914 LTC4316 I2C Address Translator - Stemma QT / Qwiic

Adafruit 5914 LTC4316 I2C Address Translator - Stemma QT / Qwiic

Adafruit has hundreds of designs that use I2C - a two-wire protocol that can let you quickly connect..

रo 966.00

Tags: Terminator, STEMMA, QT, Qwiic

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments