This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision. Most current-measuring devices such as our current panel meter are only good for low side measuring. That means that unless you want to get a battery involved, you have to stick the measurement resistor between the target ground and true ground. This chip is much smarter - it can handle high side current measuring, up to +26VDC, even though it is powered with 3 or 5V. It will also report back that high side voltage, which is great for tracking battery life or solar panels.

Specifications:

0.1 ohm 1% 2W current sense resistor
Up to +26V target voltage
Up to ±3.2A current measurement, with ±0.8mA resolution
Note: The terminal block included with your product may be blue or black.
This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers
Product Dimensions: 25.6mm x 20.4mm x 4.7mm / 1.0" x 0.8" x 0.2"

Documents:

Datasheet

Warranty: 30 days

Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.

Package Includes:

1 x Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Brand: Adafruit
Product Code:Ada-904-INA219
Reward Points:11
Availability:In Stock

रo 1,074.00
Price in reward points:1133
50 or more रo 940.00
140 or more रo 936.00

Qty

0 reviews / Write a review