The INA228 is an amazing power monitoring chip, with best-of-everything support: up to 85VDC common-mode, high or low side measurements, 20-bit (!) ADC for precision measurements from milliamp to Amp, and I2C interface for easy configuration of alerts, oversampling, gain adjustments and more!

This breakout board may well be the last current sensing solution you every need to buy. Not only can it do the work of two multimeters, but it can do it with amazing precision and flexibility. With it you can measure high or low side DC current, the bus voltage, and have it automatically calculate the power. It can do so over impressive voltage, current, and temperature ranges with better than 1% accuracy, all while delivering the data in an easy to use format over I2C.

Works great with any microcontroller that is CircuitPython or Arduino compatible as well as single board computers such as the Raspberry Pi. It is compatible with 3V or 5V logic and can measure bus voltages up to +85VDC. Not for use with AC voltages.

Most current-measuring devices operate with some notable constraints that limit what they can be used for. Many are low-side only which can cause issues as the ground reference changes with current. Others like its little sister the INA219B avoid this by measuring on the high side but need to change their shunt resistor to measure different current ranges. The INA228 avoids these limitations, and with the precision 15milliohm shunt resistor on board, it can be used to measure as much as +85V at up to 10A (~10uA per LSB) or 2.75A (~2.5uA per LSB) Continuous on either the high or low side. Wow!

The voltage across the integrated 15 milliohm (.015 ohms!), 0.1% shunt resistor is measured by the internal 20 bit ADC, allowing for measurements over the impressive current range with a resolution of 10uA per LSB in high current measurement mode or 2.5uA per LSB in low current measurement mode.

In a high side configuration the bus voltage measurement and power calculation can be retrieved accurately, however advanced hackers wanting to measure bus voltage in a low side configuration will need to cut the jumper connecting V+ to VBUS and connect the VBUS pin to the voltage bus.

Comes as a fully assembled breakout board with a 3.5mm terminal block and header. Some light soldering is required to attach the header for use in a breadboard.


Technical Details:

  • Product Dimensions: 25.8mm x 20.2mm x 10.1mm / 1.0" x 0.8" x 0.4"

Package Includes:

  • 1 x Adafruit 5832 INA228 - I2C 85V, 20-bit High or Low Side Power Monitor - STEMMA QT / Qwiic

Write a review

Please login or register to review

Adafruit 5832 INA228 - I2C 85V, 20-bit High or Low Side Power Monitor - STEMMA QT / Qwiic

  • Brand: Adafruit
  • Product Code:Ada-5832-INA228-I2C-85V-20-bit
  • Reward Points:17
  • Availability:In Stock
  • रo 1,614.00

  • Price in reward points:1702

  • 45 or more रo 1,413.00
  • 96 or more रo 1,407.00

Related Products

Adafruit 2922 Adalogger FeatherWing RTC+SD Add-on For All Feather Boards

Adafruit 2922 Adalogger FeatherWing RTC+SD Add-on For All Feather Boards

A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger Feat..

रo 966.00

Adafruit 1164 INA169 Analog DC Current Sensor Breakout - 60V 5A Max

Adafruit 1164 INA169 Analog DC Current Sensor Breakout - 60V 5A Max

This breakout board will solve all your current-monitoring problems. Instead of struggling with a mu..

रo 1,074.00

Adafruit 1083 ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier

Adafruit 1083 ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC,..

रo 1,074.00

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

This breakout board will solve all your power-monitoring problems. Instead of struggling with two mu..

रo 1,074.00

Adafruit 2717 TCA9548A I2C Multiplexer

Adafruit 2717 TCA9548A I2C Multiplexer

You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your ..

रo 665.00

Adafruit 2107 USB Isolator - 100mA Isolated Low/Full Speed USB

Adafruit 2107 USB Isolator - 100mA Isolated Low/Full Speed USB

Have some USB logic analyzer, multimeter or oscilloscope and bumping up against the frustration of a..

रo 3,772.00

Adafruit 6062 INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor - STEMMA QT / Qwiic

Adafruit 6062 INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor - STEMMA QT / Qwiic

This breakout board will solve all your multi-rail power-monitoring problems. Instead of struggling ..

रo 0.00

Adafruit 4226 INA260 High or Low Side Voltage, Current, Power Sensor

Adafruit 4226 INA260 High or Low Side Voltage, Current, Power Sensor

This breakout board may well be the last current sensing solution you every need to buy. Not only ca..

रo 1,074.00

Tags: Adafruit, INA228, STEMMA QT, Qwiic

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments