Make a game or robotic controller for any I2C microcontroller or microcomputer with this tiny gamepad breakout board. This design has a 2-axis thumb joystick and 6 momentary buttons (4 large and 2 small). The board communicates with your host microcontroller over I2C so it's easy to use and doesn't take up any of your precious analog or digital pins. There is also an optional interrupt pin that can alert your feather when a button has been pressed or released to free up processor time for other tasks.

This board features Adafruit seesaw technology - a custom programmed little helper microcontroller that takes the two analog inputs from the joystick, and 6 button inputs, and converts it into a pretty I2C interface. This I2C interface means you don't 'lose' any GPIO or analog inputs, and it works with any and all microcontrollers or microcomputers - even if they don't have an analog input for the thumbstick! 

  • If you have an I2C address conflict, or you want to connect more than one of these to a board, there are two address-select jumpers so you have 4 options of I2C addresses.
  • There's an optional IRQ (interrupt) line that you can use if you'd like the gamepad to let you know when a button has been pressed. Since its optional you will need to connect a separate wire for the IRQ line, or just leave it disconnected.

Comes with one assembled and programmed Gamepad, and some 0.1" header. If you aren't using Stemma QT cables, some soldering is required to attach the header for breadboarding.


Technical Details:

  • Product Dimensions: 50.8mm x 22.8mm x 14.5mm / 2.0" x 0.9" x 0.6"

Package Includes:

  • 1 x Adafruit 5743 Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic

Write a review

Please login or register to review

Adafruit 5743 Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic

  • Brand: Adafruit
  • Product Code:NR-Ada-5743-Gamepad
  • Reward Points:8
  • Availability:In Stock
  • रo 809.00

  • Price in reward points:854

  • 45 or more रo 708.00
  • 190 or more रo 705.00

Related Products

Adafruit 3632 Joy FeatherWing for all Feathers

Adafruit 3632 Joy FeatherWing for all Feathers

Make a game or robotic controller with this Joy-ful FeatherWing.This FeatherWing has a 2-axis joysti..

रo 1,074.00

Adafruit 3464 Joy Bonnet for Raspberry Pi

Adafruit 3464 Joy Bonnet for Raspberry Pi

This Thingy is very simple, it lets you connect two 15-pin 1.0mm pitch cables end-to-end and extend ..

रo 1,614.00

Adafruit 4242 PyGamer for MakeCode Arcade, CircuitPython or Arduino

Adafruit 4242 PyGamer for MakeCode Arcade, CircuitPython or Arduino

What fits in your pocket, is fully Open Source, and can run CircuitPython, MakeCode Arcade or Arduin..

रo 4,851.00

Adafruit 4200 PyBadge for MakeCode Arcade, CircuitPython or Arduino

Adafruit 4200 PyBadge for MakeCode Arcade, CircuitPython or Arduino

What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right..

रo 3,772.00

Adafruit 3321 Mini Color TFT with Joystick FeatherWing

Adafruit 3321 Mini Color TFT with Joystick FeatherWing

Add a dazzling color display to your Feather project with this Adafruit Mini Color TFT with Joystick..

रo 2,693.00

Adafruit 5753 PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic

Adafruit 5753 PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic

Back in my day, we used to have these big chunky PC joysticks that would plug into the back of your ..

रo 642.00

Tags: Adafruit, Mini, I2C, Gamepad, seesaw, STEMMA QT, Qwiic

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments