The Feather M4 Express, gets a glow-up here with an upgrade to the SAME51 chipset which has built-in CAN bus support!  Like its SAMD51 cousin, the ATSAME51J19 comes with a 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM.
At the end of the board we have placed a CAN transceiver chip as well as a 5V converter to generate 5V power to the transceiver even when running on battery. The two CAN signal lines and ground reference signal are available on a 3-pin 3.5mm terminal block. The chip and booster can be put to sleep for power saving. The built in CAN can read or write packets and has support in both Arduino and CircuitPython.
The Feather M4 Can Express also comes with a Mini NeoPixel and 2 MB SPI Flash storage. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB.
 
 
Features:
  • Measures 2.0" x 0.9" x 0.28" (50.8mm x 22.8mm x 7mm) without headers soldered in
  • Light as afeather - 5 grams
  • ATSAME51 32-bit Cortex M4 core running at 120 MHz, 32-bit, 3.3V logic and power
  • Hardware CAN bus support with built-in transceiver, 5V booster and terminal connection.
  • Floating point support with Cortex M4 DSP instructions
  • 512 KB flash, 192 KB RAM
  • 2 MB SPI FLASH chip for storing files and CircuitPython code storage.
  • No EEPROM
  • 32.768 KHz crystal for clock generation & RTC
  • 3.3V regulator with 500mA peak current output
  • USB Type C connector for USB native support, comes with USB bootloader and serial port debugging
  • Built in crypto engines with AES (256 bit), true RNG, Pubkey controller
  • Tons of GPIO! 21 x GPIO pins with following capabilities:
    • Dual 1 MSPS 12 bit true analog DAC (A0 and A1) - can be used to play 12-bit stereo audio clips
    • Dual 1 MSPS 12 bit ADC (6 analog pins some on ADC1 and some on ADC2)
    • 6 x hardware SERCOM - Native hardware SPI, I2C and Serial all available
    • 16 x PWM outputs - for servos, LEDs, etc
    • I2S input and output
    • 8-bit Parallel capture controller (for camera/video in)
  • Built in 100mA lipoly charger with charging status indicator LED
  • Pin #13 red LED for general purpose blinking
  • Power/enable pin
  • 4 mounting holes
  • Reset button
Package Includes:
  • 1 x Adafruit Feather M4 CAN Express with ATSAME51

Write a review

Please login or register to review

Adafruit 4759 Feather M4 CAN Express with ATSAME51

  • Brand: Adafruit
  • Product Code:Ada-4759-Feather-M4-CAN
  • Reward Points:28
  • Availability:In Stock
  • रo 2,693.00
  • रo 2,386.00

  • Price in reward points:2841

  • 50 or more रo 2,357.00
  • 60 or more रo 2,347.00

Related Products

Adafruit 5708 CAN Pal - CAN Bus Transciever - TJA1051T/3

Adafruit 5708 CAN Pal - CAN Bus Transciever - TJA1051T/3

If you'd like to connect a board with native CAN Peripheral support, the Adafruit CAN Pal Transceive..

रo 426.00

Adafruit 3800 ItsyBitsy M4 Express featuring ATSAMD51

Adafruit 3800 ItsyBitsy M4 Express featuring ATSAMD51

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M4 Expressfeatur..

रo 1,614.00

Adafruit 5709 CAN Bus FeatherWing - MCP2515

Adafruit 5709 CAN Bus FeatherWing - MCP2515

CAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is ..

रo 1,350.00

Tags: Feather, CAN, ATSAME51

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments