Connect your projects to the internet with the WiFi TinyShield! Based on the Atmel ATWINC1500 WiFi module, this module supports 802.11 b/g/n, SSL, different security modes (WEP, WPA, WPA2, and unsecured connections) and has a built-in TCP/IP Stack that offloads network processing from your TinyDuino. The easy to use Arduino/Atmel supplied software library shows numerous examples on how to scan for WiFi access points, connect to an access point, run DHCP, ping IP addresses, do DNS lookups, connect as a client to a webserver and download web pages, or even act as your own webserver and access point.

This TinyShield includes an integrated antenna on the module itself with FCC/CE approval as well as built-in LEDs that indicate connection state and active data transfer. This TinyShield also includes level shifters and a local power supply to ensure proper and safe operation over the entire TinyDuino operating voltage range up to 5V, and uses an SPI interface to allow for fast data transfers.

Note: This module can act as an access point!

To learn more about the TinyDuino Platform, click here


 

TECHNICAL DETAILS

To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix

Atmel ATWINC1500 WiFi Specs

  • IEEE 802.11 b/g/n (2.4GHz)
  • Embedded IPv4 TCP/IP stack
  • Up to 72 Mbps PHY throughput
  • TX power: +19.5 dBm at 11 Mbps, CCK
  • RX sensitivity: –88 dBm, 11 Mbps

TinyDuino Power Requirements

  • Voltage: 3.3V - 5.5V 
  • Current:
    • Active Mode, highest speed: 311mA TX at +18 dBm, 80.5mA RX
    • Shutdown Mode: <4uA
    • Due to the current requirements, this board cannot be run using the TinyDuino coin cell option

Pins Used

SPI Interface used

  • A3 - RESET: This signal is an input to the WiFi module and is used to reset the module.
  • 8 - SPI_CS: This signal is the SPI chip select for the WiFi module
  • 2 - SPI_IRQ: This signal is the interrupt output from the WiFi module and into the TinyDuino.
  • 11 - SCLK: This signal is the serial SPI clock out of the TinyDuino and into the WiFi module.
  • 12 - MISO: This signal is the serial SPI data out of the WiFi module and into the TinyDuino.
  • 13 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the WiFi module.

Dimensions

  • 20mm x 30mm (.787 inches x 1.181 inches)
  • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
  • Weight: 2.39 gram (0.084 ounces)

NOTES

 

  • This board is compatible with the Arduino WiFi101 library which is available through the Arduino IDE Library manager!
  • However, the pin configuration is different, which requires the following line at the beginning of your setup() function:
WiFi.setPins(8,2,A3,-1);

 

 

 

DOWNLOADS

Write a review

Please login or register to review

WiFi TinyShield (ATWINC1500)

  • Brand: TinyCircuits
  • Product Code:TinyC-WiFi-ATWINC1500
  • Reward Points:34
  • Availability:In Stock
  • रo 3,415.00

  • Price in reward points:3415

  • 5 or more रo 3,386.00
  • 7 or more रo 3,357.00
  • 20 or more रo 3,329.00

Related Products

Wireless USB Dongle 802.11 b/g/n 2.4 GHz Single Chip-Ralink RT5370

Wireless USB Dongle 802.11 b/g/n 2.4 GHz Single Chip-Ralink RT5370

Lowest Price in India! Highly integrated with PA, LNA, T/R switch, and diversity switch The ..

रo 285.00 रo 385.00

TinyDuino Processor Board (without Battery)

TinyDuino Processor Board (without Battery)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,370.00 रo 1,278.00

TinyDuino Processor Board (with Coin Cell Holder)

TinyDuino Processor Board (with Coin Cell Holder)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,364.00

TinyDuino Mounting Kit

TinyDuino Mounting Kit

Mounting Kit for the TinyDuino   Mounting kit for mounting up to 4 TinyDuino Boards / TinySh..

रo 338.00

WiFi USB Dongle 802.11b/g/n - RT8188 CF-WU810N - Broadcast or Receive Wi-Fi

WiFi USB Dongle 802.11b/g/n - RT8188 CF-WU810N - Broadcast or Receive Wi-Fi

Ralink RT8188 CF-WU810N  WiFi USB Dongle with hotspot capability ! Features: 802.11 b/g/..

रo 175.00 रo 365.00

SimpleLink Wi-Fi CC3200 LaunchPad

SimpleLink Wi-Fi CC3200 LaunchPad

This version of the SimpleLink Wi-Fi CC3200 LaunchPad is based on pre-production silicon, which can ..

रo 6,575.00 रo 7,827.00

TinyDuino Processor Board (with Lithium Battery Support)

TinyDuino Processor Board (with Lithium Battery Support)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,706.00

CC3220SF-LAUNCHXL LaunchPad development kit for Wi-Fi SimpleLink wireless MCU

CC3220SF-LAUNCHXL LaunchPad development kit for Wi-Fi SimpleLink wireless MCU

The SimpleLink™ Wi-Fi® CC3220SF LaunchPad™ development kit (CC3220SF-LAUNCHXL) highlights CC3220SF, ..

रo 5,976.00 रo 7,114.00

Tags: TinyShield, Wifi, ATWINC1500

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments