This Wireling lets you use a discrete joystick for inputs to your project! This Up, Down, Left, Right joystick board interfaces with an I2C I/O expander to be read by the an Arduino processor or Raspberry Pi!
Please note that this is not a full range joystick. It is a discrete joystick which is essentially 4 buttons mounted sideways at the base of the joystick knob.
Technical Specifications:
SX1505 Specifications:
- 8 Channel GPIO with NINT and NRESET
- Fully programmable logic functions (PLD)
SKRHABE010 Joystick Specifications:
- 4 Directional Digital Joystick
- Center Pushbutton Input
- I2C Semtech SX1505 I/O Expander
TinyDuino Power Requirements:
- Voltage: 3.0V - 5.5V
- Current: 1.0uA (Normal Mode). Due to the low current, this board can be run using the TinyDuino coin cell option
Pins Used:
- A5/SCL - I²C Clock
- A4/SDA - I²C Data
Dimensions:
- 17mm x 10mm (.670 inches x .394 inches)
- Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 16mm (0.63 inches)
Notes:
- You can also use this Wireling without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other development board of your choice!
- 5-Pin Wireling cables not included and sold separately.
Package Includes:
- 1 X Joystick Wireling
Joystick Wireling
- Brand: TinyCircuits
- Product Code:TinyC-Joystick-Wireling
- Reward Points:5
- Availability:In Stock
-
रo 509.00
- Price in reward points:509
-
- 25 or more रo 504.00
- 50 or more रo 500.00
- 120 or more रo 496.00
Related Products
TinyShield Joystick
Two Analog Joystick and two push buttons.. This TinyShield lets you add some control t..
रo 2,133.00
Parallax 27808 Gimbal Joystick with Adapter
The Quad-Bearing Gimbal Joystick is a high-quality, two-axis human input device. It is useful for se..
रo 2,380.00
Tags: TinyCircuit, Joystick, Wireling
