This Wireling lets you measure Temperature, Pressure, Humidity, and Volatile Organic Compounds (VOCs) via the BME680. This Wireling sensor is an upgrade from the Pressure & Humidity Wireling that uses the BME280 to measure Pressure and Humidity.
 
Technical Specifications: 
Bosch BME680 Sensor Specifications:
  • Digital interface I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
  • Operating range -40 - +85°C, 0-100 % r.H., 300-1100 hPa
  • Humidity, Pressure, Gas sensor can be independently enabled / disabled
  • RoHS compliant, halogen-free, MSL1

Pressure Sensor:

  • RMS Noise 0.12 Pa, equiv. to 1.7 cm
  • Offset temperature coefficient ±1.3 Pa/K, equiv. to ±10.9 cm at 1 °C temperature change
Humidity Sensor:
  • Response time 8 s
  • Accuracy tolerance ±3 % relative humidity
  • Hysteresis ±1.5% relative humidity
Gas Sensor:
  • Response time < 1s (for new sensors)
  • Power consumption < 0.1mA in ultra-low power mode
  • Output data processing: direct index for air quality (IAQ) output
TinyDuino Power Requirements:
  • Voltage: 3.0V - 5.5V 
Current:
  • 2.1 µA @ 1 Hz humidity and temperature
  • 3.1 µA @ 1 Hz pressure and temperature
  • 3.7 µA @ 1 Hz humidity, pressure, and temperature
  • 0.15 µA in sleep mode
  • Due to the low current, this board can be run using the TinyDuino coin cell option.
Pins Used:
  • A5/SCL - I²C Serial Clock line
  • A4/SDA - I²C Serial Data line
Dimensions:
  • 10mm x 10mm (.394 inches x .394 inches)
  • Max Height (from the lower bottom of Wireling to upper top Wireling Connector): 3.70mm (0.15 inches)
Notes:  
  • You can also use this Wireling without the TinyDuino – modifying the connecting cable by removing the opposite connector and stripping/tinning the wires, you can solder the connector cable to any other microcontroller board of your choice! 
  • 5-Pin Wireling cables not included and sold separately.

Package Includes:

  • 1 x Temperature, Pressure, Humidity And VOC BME680 Wireling

Write a review

Please login or register to review

Temperature, Pressure, Humidity And VOC BME680 Wireling

  • Brand: TinyCircuits
  • Product Code:TinyC-BME680-Sensor
  • Reward Points:17
  • Availability:In Stock
  • रo 1,706.00

  • Price in reward points:1706

  • 7 or more रo 1,691.00
  • 15 or more रo 1,677.00
  • 40 or more रo 1,662.00

Related Products

Parallax 28061 BME680 Environmental Sensor

Parallax 28061 BME680 Environmental Sensor

Raise your project's environmental awareness with the BME680. The Bosch Sensortec BME680 Integrated ..

रo 3,571.00

TinyShield Barometric Pressure / Altitude Sensor

TinyShield Barometric Pressure / Altitude Sensor

The Barometric Pressure TinyShield allows you to measure barometric pressure and temperature with yo..

रo 1,278.00

TinyShield Temperature/Humidity

TinyShield Temperature/Humidity

This TinyShield lets you measure temperature and humidity from the TinyDuino.  Based around the Sili..

रo 1,278.00

Soil Moisture Sensor Wireling

Soil Moisture Sensor Wireling

This Wireling features the ATtiny25, a high performance, low-power AVR 8-bit controller. Moisture is..

रo 509.00

Ambient Light Sensor Wireling

Ambient Light Sensor Wireling

This Wireling lets you measure ambient light levels via the TSL2572, the same sensor on our Ambient ..

रo 509.00

Grove - Temperature, Humidity, Pressure and Gas Sensor for Arduino - BME680

Grove - Temperature, Humidity, Pressure and Gas Sensor for Arduino - BME680

The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino ..

रo 2,106.00

Tags: Temperature, Pressure, Humidity, VOC, BME680, Wireling

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments