• BLUETOOTH LOW ENERGY TINYSHIELD (ST)

Our new Bluetooth Low Energy (BLETinyShield combines both master and slave modes into one module! This TinyShield allows you to connect your TinyDuino system to any compatible iOS or Android device using Bluetooth Low Energy (also known as Bluetooth Smart and Bluetooth 4.1). This technology is great for low power sensors and accessories and works with most modern phones. This shield acts as a drop-in hardware and software replacement for NRF8001 (Nordic) TinyShield projects. Unlike previous BLE TinyShields, your Arduino sketch code can modify your module's connection parameters directly.

This TinyShield is based around the BlueNRG-MS chipset by STMicroelectronics, which comes in the SPBTLE-RF module. The TinyShield also includes power supply and level shifters on the board, so you can run your TinyDuino from 3.0V – 5V.

Since the SPBTLE-RF module supports both master and slave modes, you can communicate both with a Bluetooth LE device (i.e. a smartphone) and another BLE TinyShield or other BLE module with slave mode. If you have one of our previous BLE models, a BlueGiga or a Nordic, it can communicate with those as well.

Note: This product is for advanced users, and typically requires that the user develops their own iOS or Android BLE app in order to use this.

To learn more about the TinyDuino Platform, click here


TECHNICAL DETAILS

To see what other TinyShields this will work with or conflict with, check out the TinyShield Compatibility Matrix

Nordic BLE nRF8001 Specs

  • Fully Bluetooth v4.1 compliant
    • Supports master and slave modes
    • Multiple modes supported simultaneously
  • Integrated Bluetooth Smart stack
    • GAP, ATT/GATT, SM, L2CAP, LL, RFPHY
    • Bluetooth Smart profiles
  • Radio performance
    • Integrated chip antenna
    • TX power: +4 dBm
    • Receiver sensitivity: -88 dBm
    • Range: up to 20m

TinyDuino Power Requirements

  • Voltage: 3.0V - 5.5V 
  • Current:
    • Transmit: 10.9mA (+4 dBm)
    • Receive: 7.3mA (Standard mode)
    • Down to 8.7µA average for 1s connection interval
    • Down to 14.5µA average for 500ms connection interval
    • Down to 26.1µA average for 250ms connection interval
    • Down to 119.9µA average for 50ms connection interval
    • Deep Sleep Mode: 1.7 µA
    • Due to the low current, this board can be run using the TinyDuino coin cell option

Pins Used

SPI Interface used

  • 2 - SPI_IRQ: This signal is the interrupt output from the SPBTLE-RF to the TinyDuino.
  • 9 - BT_RESET: This signal is the reset signal to the SPBTLE-RF.
  • 10 - SPI_CS: This signal is the SPI chip select for the SPBTLE-RF.
  • 11 - MOSI: This signal is the serial SPI data out of the TinyDuino and into the radio transceiver.
  • 12 - MISO: This signal is the serial SPI data out of the radio transceiver and into the TinyDuino.
  • 13 - SPI_CLK: This signal is the serial SPI clock out of the TinyDuino and into the radio transceiver.

Dimensions

  • 20mm x 20mm (.787 inches x .787 inches)
  • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
  • Weight: 1.49 grams (0.053 ounces)

NOTES
  • The interrupt signal can be changed from pin 2 to pin 3 by removing resistor R2 and soldering it to position R3.

DOWNLOADS

Write a review

Please login or register to review

BLUETOOTH LOW ENERGY TINYSHIELD (ST)

  • Brand: TinyCircuits
  • Product Code:TinyC-Shield-Bluetooth-Low-Energy-ST
  • Reward Points:26
  • Availability:In Stock
  • रo 2,560.00

  • Price in reward points:2560

  • 5 or more रo 2,539.00
  • 10 or more रo 2,517.00
  • 25 or more रo 2,495.00

Related Products

USB Mini Bluetooth CSR 4.0 Wireless Dongle (20m Range)

USB Mini Bluetooth CSR 4.0 Wireless Dongle (20m Range)

Tiny USB Bluetooth dongle with V4.0 Compliant for data communication.   Specifications: ..

रo 302.00

TinyDuino Processor Board (without Battery)

TinyDuino Processor Board (without Battery)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,370.00 रo 1,278.00

TinyDuino Processor Board (with Coin Cell Holder)

TinyDuino Processor Board (with Coin Cell Holder)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,364.00

TinyShield Bluetooth

TinyShield Bluetooth

Wirelessly connect to your TinyDuino projects!  Using the miniature Roving Network / Microchip R..

रo 4,270.00

Xadow - BLE

Xadow - BLE

The Xadow - BLE is a Bluetooth Smart enabled Xadow form factor module based on CC2540 microprocessor..

रo 1,200.00 रo 3,285.00

TinyShield Bluetooth Low Energy - Nordic

TinyShield Bluetooth Low Energy - Nordic

Bluetooth Low Energy (BLE) TinyShield allows you to connect your TinyDuino system to any compatible ..

रo 2,560.00

TinyScreen Smart Watch Kit

TinyScreen Smart Watch Kit

Create your own Bluetooth Low energy Smart Watch with TinyScreen!   This TinyScreen Smart Wa..

रo 6,535.00 रo 6,835.00

TinyDuino Processor Board (with Lithium Battery Support)

TinyDuino Processor Board (with Lithium Battery Support)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,706.00

TinyScreen Smart Watch Housing and Strap

TinyScreen Smart Watch Housing and Strap

This is the 3D printed enclosure (both the top and bottom haff), and a watch wrist strap to use to c..

रo 2,133.00

Blueduino Rev2-Arduino compatible plus BLE CC2540

Blueduino Rev2-Arduino compatible plus BLE CC2540

The BlueDuino Rev2 is an Arduino compatible microcontroller development board based on the ATmega32U..

रo 1,680.00

LightBlue Bean Plus

LightBlue Bean Plus

The LightBlue Bean+ is an Arduino-compatible board that you program wirelessly using Bluetooth Low E..

रo 7,065.00

Bluetooth Bee - Standalone

Bluetooth Bee - Standalone

Save that extra Arduino you have lying around for another project, this two-for-one device has the A..

रo 2,200.00

DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0

DFRobot Beetle BLE - The Smallest Board Based on Arduino Uno with Bluetooth 4.0

The Beetle Ble (Former name as Bluno Beetle)  is  an Arduino Uno based board with  bluetooth 4.0 (BL..

रo 1,183.00 रo 1,364.00

Bluno - An Arduino Uno with Bluetooth 4.0

Bluno - An Arduino Uno with Bluetooth 4.0

It's time to get Bluetooth 4.0 into your project and sync it up with your phone! For aficionados of ..

रo 2,020.00 रo 2,328.00

Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0

Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0

Bluno Mega 2560 - An Arduino Mega 2560 with Bluetooth 4.0 Last year we introduced you BLUNO, our ..

रo 2,379.00 रo 2,741.00

CurieNano - A Mini Genuino/Arduino 101 Board

CurieNano - A Mini Genuino/Arduino 101 Board

CurieNano - A mini Genuino/Arduino 101 Board   The DFRobot CurieNano is a small dev..

रo 3,443.00 रo 3,967.00

Alamode - Arduino Compatible Raspberry Pi Plate

Alamode - Arduino Compatible Raspberry Pi Plate

Alamode - Arduino Compatible Raspberry Pi Plate Alamode is an Arduino compatible development boa..

रo 1,113.00

BLE Micro - Super Compact BLE Module

BLE Micro - Super Compact BLE Module

Bluno is great but I want small size for my product; Ble-link does well in its work but I don't want..

रo 777.00 रo 895.00

Seeeduino Cloud - Arduino compatible openWRT controller

Seeeduino Cloud - Arduino compatible openWRT controller

Seeeduino Cloud is a microcontroller board based on Dragino WiFi IoT module HE and ATmega32u4. HE is..

रo 2,120.00

Ameba RTL8710AF Wireless Dev Board

Ameba RTL8710AF Wireless Dev Board

Ameba RTL8710AF is a highly integrated single-chip with low power consumption mechanism for IoT (Int..

रo 2,133.00

Ameba RTL8195 Arduino Wireless Board

Ameba RTL8195 Arduino Wireless Board

Ameba is an Arduino-compatible development board for internet of things, beside WiFi connectivi..

रo 3,019.00

BLE Micro EVB- Bluetooth 4.0 Device

BLE Micro EVB- Bluetooth 4.0 Device

Bluno is great but I want small size for my product; Ble-link does well in its work but I don't want..

रo 1,530.00 रo 1,763.00

Bluno Bee - Turn Arduino to a Bluetooth 4.0 (BLE) Ready Board

Bluno Bee - Turn Arduino to a Bluetooth 4.0 (BLE) Ready Board

Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is co..

रo 825.00 रo 951.00

Bluno Beetle Shield

Bluno Beetle Shield

The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravit..

रo 326.00 रo 376.00

Seeeduino V4.3 (ATMega328P)

Seeeduino V4.3 (ATMega328P)

Seeeduino V4.3 is an Arduino-compatible board, which is based on ATmega328P MCU, Arduino UNO bootloa..

रo 1,015.00

IRduino - Arduino compatible USB IR Receiver

IRduino - Arduino compatible USB IR Receiver

An open source, programmable, Arduino-compatible USB infrared receiver that gives new life to old re..

रo 1,490.00

Stereo Bluetooth Amplifier Board

Stereo Bluetooth Amplifier Board

This is a small size and cost-effective Bluetooth 5.0 digital amplifier module with a volume adjustm..

रo 777.00 रo 895.00

EMB1082 BLE Module - Support MXMESH

EMB1082 BLE Module - Support MXMESH

EMB1082 is an embedded BLE module by MXCHIP. It integrates a BLE5.0 single mode SoC, including ARM C..

रo 233.00

Tags: TinyShield, Bluetooth, Low, Energy, ST

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments