• TinyLily Motor Board

Drive a 1.8A DC Motor

When TI came out with the world’s smallest DC motor driver chip, we knew we had to buy a board built around it. Based around the 2mm x 2mm TI DRV8837 Motor Driver (H-Bridge) IC, this board is incredibly tiny at only 10mm in diameter, yet can drive a 5V 1.8Amp motor! The DRV8837 is extremely easy to use and interface to your favorite processor board (such as a TinyDuino, TinyLily or a standard Arduino), and uses a simple PWM to control motor speed, direction, coasting and braking. The board includes a bypass capacitors and all the I/O of the DRV8837 brought out to sewtabs, as well as heatsinking the chip to a large plane on the bottom side of the board to help with heat dissipation.

 
The TI DRV8837 has one H-bridge driver consisting of N-channel power MOSFETs to drive a DC motor or one winding of a stepper motor, or other devices like solenoids. An internal charge pump generates needed gate-drive voltages. There are internal shutdown functions for overcurrent protection, short-circuit protection, undervoltage lockout and over temperature. The DRV8837 can supply up to 1.8 A of output current. It operates on a motor power-supply voltage from 1.8 V to 11 V, and a device power-supply voltage of 1.8 V to 7 V. There is also a extremely low power sleep mode with 120nA sleep current.

.

Specifications:

  • Washable
  • Eight Sewtabs – 1.2mm in diameter, easy to use with standard conductive thread and needles
  • Robust Gold Finish – makes soldering easy and is non-corrosive
  • Ultra compact size and weight
  • Dimensions: 10mm diameter (0.394 inches)
  • Max Height: 1.41mm (0.056 inches)
  • Ultra-thin 0.61mm (0.024 inches) PCB
  • TI DRV8837 H-bridge motor driver
  • Low MOSFET On-Resistance: HS + LS 280mOhm
  • 1.8A Max Drive Current
  • 1.8V to 11V Motor Operating Supply Voltage Range
  • Seperate Motor and Logic Power Supply Pins
  • PWM (IN/IN) Interface
  • Dedicated Sleep Pin
Support:

Write a review

Please login or register to review

TinyLily Motor Board

  • Brand: TinyCircuits
  • Product Code:TinyC-Lily-Motor-Board
  • Reward Points:4
  • Availability:In Stock
  • रo 423.00

  • Price in reward points:423

  • 30 or more रo 420.00
  • 60 or more रo 416.00
  • 145 or more रo 412.00

Related Products

TinyShield Motor x4

TinyShield Motor x4

Drive Four Independently Controlled DC Brushed Motors from your TinyDuino The TinyShield Motor x..

रo 1,706.00

TinyLily Mini Processor Board

TinyLily Mini Processor Board

For All Your Tiny e-textile Needs The TinyCircuits TinyLily Mini is an Arduino compatible module..

रo 851.00

Conductive Stainless Steel Sewing Thread - 22 Meter/72ft

Conductive Stainless Steel Sewing Thread - 22 Meter/72ft

This is conductive stainless steel sewing thread. It's very thin, strong, smooth that is suited to b..

रo 397.00

TinyShield Dual Motor

TinyShield Dual Motor

Drive Two Independently Controlled DC Brushed Motors from your TinyDuino   The Dual Motor Ti..

रo 1,826.00

Adafruit 640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft

Adafruit 640 Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft

The ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless ste..

रo 750.00

Tags: TinyLily, Motor, Board

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments