• TinyShield Accelerometer

Measure accelerations in three perpendicular axes.

This Tinyshield features the high performance and low power Bosch BMA250 3-axis accelerometer. The BMA250 allows measurement of accelerations in three perpendicular axes and thus senses tilt, motion, shock, and vibration in your projects. There is also an integrated temperature sensor built in.

 
Even though the BMA250 is designed to run at 1.8V – the Accelerometer TinyShield incorporates level shifters and a local power supply to ensure proper and safe operation over the entire TinyDuino operating voltage range up to 5V.
 
You can also use this shield without the TinyDuino – there are 0.1″ spaced holes for power, ground, and the two I2C signals along the side of the TinyShield to allow you to connect a different system.
 
Specifications:
  • Ultra compact size and weight (smaller than a US Quarter!)
  • Square Version: 20mm x 20mm (.787 inches x .787 inches)
  • Max Height (from lower bottom TinyShield Connector to upper top TinyShield Connector): 5.11mm (0.201 inches)
  • Bosch BMA250 Accelerometer
  • 3-axix (X, Y & Z)
  • Digital resolution: 10bit
  • Resolution: 3.9mg
  • Measurement ranges: +-2g, +-4g, +-8g, +-16g
  • Sensitivity: 2g: 256LSB/g, 4g: 128LSB/g, 8g: 64LSB/g, 16g: 16LSB/g
  • Zero-g offset (over lifetime): +-80mg
  • Bandwidths: 1000Hz… 8Hz
  • Low Power: 139uA @2kHz data rate
  • I2C Mode used
  • Arduino pins A4 and A5 are used by this shield
  • Built in level shifters and linear power supply to allow your TinyDuino to run up to 5.0V operation.
Support:
 
 

Write a review

Please login or register to review

TinyShield Accelerometer

  • Brand: TinyCircuits
  • Product Code:TinyC-Shield-accelerometer
  • Reward Points:12
  • Availability:In Stock
  • रo 1,278.00

  • Price in reward points:1278

  • 10 or more रo 1,267.00
  • 20 or more रo 1,256.00
  • 50 or more रo 1,246.00

Related Products

GY-61 ADXL335 Analog Output Accelerometer Module Angular Sensor Transducer Module

GY-61 ADXL335 Analog Output Accelerometer Module Angular Sensor Transducer Module

GY-61 - Analog acceleration sensor module using ADXL335 GY-61 is a small, thin, low power, compl..

रo 250.00 रo 320.00

Parallax 28017 Memsic 2125 Dual-axis Accelerometer

Parallax 28017 Memsic 2125 Dual-axis Accelerometer

The Memsic 2125 is a low cost, dual-axis thermal accelerometer capable of measuring tilt, accelerati..

रo 2,623.00

3-Axis Accelerometer Board (MMA7361) cum Angle Sensor

3-Axis Accelerometer Board (MMA7361) cum Angle Sensor

3-Axis Accelerometer Board (MMA7361) for Arduino etc. This Accelerometer module is based on the..

रo 320.00 रo 402.00

TinyDuino Processor Board (without Battery)

TinyDuino Processor Board (without Battery)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,370.00 रo 1,278.00

TinyDuino Processor Board (with Coin Cell Holder)

TinyDuino Processor Board (with Coin Cell Holder)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,364.00

TinyDuino Processor Board (with Lithium Battery Support)

TinyDuino Processor Board (with Lithium Battery Support)

The Heart of the TinyDuino Platform! The TinyCircuits TinyDuino is an Arduino compatible board i..

रo 1,706.00

TinyShield Gyroscope

TinyShield Gyroscope

This TinyShield features the high performance and lower power ST L3G4200D 3-axis gyroscope. The L3G4..

रo 2,133.00

TinyShield Temperature/Humidity

TinyShield Temperature/Humidity

This TinyShield lets you measure temperature and humidity from the TinyDuino.  Based around the Sili..

रo 1,278.00

Tags: TinyShield, Accelerometer

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments