8GB / 32GB / 64GB (eMMc Module)

16GB eMMC module uses both eMMC 5.1 chipset and the Phison eMMC chipset.

• Cutting-edge and competitive, eMMC offers incredible performance at a faster processing speed for today’s single board computers. Achieving maximum sequential Read/Write speeds of 250MB/s and 180MB/s (based on 64GB), this tiny eMMC storage module easily handles heavy workloads.
  
• The eMMC module with round orange sticker does not have pre-installed OS.
  
• Therefore, after attaching the eMMC module to the H2/H3, connect the USB stick with the OS installation image to the H2/H3 and install the OS in the eMMC.
  
• eMMC Version 5.0 or higher interface.
  
• JEDEC/MMCA version : HS400 interface with 8bit DDR mode.
• PCB revision : 0.4

OS Installation Guide : https://wiki.odroid.com/odroid-h2/start#installation

• GTIN : 8809543642287 (8GB)
• GTIN : 8809543641822 (16GB)
• GTIN : 8809543642096 (32GB)
• GTIN : 8809543642195 (64GB)

128GB / 256GB (eMMC Module)

Ready to run out of the box

WiKi : https://wiki.odroid.com/accessory/emmc/reference_chart

Schematics : http://dn.odroid.com/eMMCModule/

128GB eMMC chip from Kingston since 6th of May 2022

256GB eMMC chip from Kingston

 You need eMMC Module Reader or USB3.0 eMMC Module Writer to flash or update the OS of the eMMC Module.(sold separately) (128GB)

Transcend USB multi-slot SD Card reader in the below picture is not included.

LIST OF eMMC reader (converter) VERIFIED MicroSD adapter.

You need USB3.0 eMMC Module Writer 2 : Works with ODROID Orange, Red and Blue eMMC modules

(It is not compatible with the Black eMMC Modules)

128GB eMMC chip from Micron

The eMMC Module reader board is not compatible with the Micron eMMC mounted 128GB eMMC Module. https://forum.odroid.com/viewtopic.php?p=307943#p307943

GTIN : 8809543641716 (128GB)

GTIN : 8809543641983 (256GB)

Note: