Fully assembled 3.2inch display with 320x240 pixels TFT LCD and a resistive touch overlay. Just plug it on top of ODROID-C1. 2x13 tall female header is already soldered on the PCB. 
 
Fast 30Mhz SPI is used for the faster frame rate.
 
You will need an official Ubuntu image to configure it. 
You can simply download the Kernel updates and configure your ODROID-C1 for this display shield. 
 
Please follow the step by step guide from the WiKi. If not, the display doesn't work.
 
Note: this display is NOT compatible with Android platform.
 
PACKAGE INCLUDES
 
You will see a fully assembled C1 3.2inch Touchscreen Display Shield and a Stylus pen. 
 
Detail parts of the shield 
- 3.2inch display with 320x240 pixels 
- Resistive touch overlay
- Converter board with 3 buttons 
- 2x13 female header
 
Specification

LCD Type TFT
LCD Interface SPI
Touch Screen Resistive
Touch Screen Controller XPT2046 (SPI)
Colors 65536 (16bit RGB-565)
Backlight LED
Resolution 320 x 240 pixels
Aspect Ratio 4:3
Weight 44g


* Limitation : GPU/VPU Hardware acceleration required OpenGL-ES and Video playback are not supported.
To playback a video on this screen, you need a trans-coded 320x240 video file with FFMPEG software decoding. 


Interface Connector 

Note: 

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/

Pin # Symbol Description
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V Power input)
3, 5, 7, 8, 10, 22 NC NC
6,9,14,20,25 GND Ground
11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
12 KEY1 Key
13 RST Reset
15 LCD_RS LCD instruction control, Instruction/Data Register selection
16 KEY2 Key
18 KEY3 Key
19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel
21 TP_SO SPI data output of Touch Panel
23 LCD_SCK / TP_SCK Serial clock of LCD/Touch Panel
24 LCD_CS LCD chip selection, low active
26 TP_CS

Touch Panel chip selection, low active

 

Write a review

Please login or register to review

3.2inch TFT+Touchscreen Shield for Odroid C1+

  • Brand: Hardkernel
  • Product Code:Hdk-C1-3-2-Inch-Touch-Screen
  • Reward Points:36
  • Availability:In Stock
  • रo 3,550.00

  • Price in reward points:3550

  • 4 or more रo 3,521.00
  • 7 or more रo 3,506.00
  • 20 or more रo 3,492.00
  • 40 or more रo 3,462.00

Related Products

LCD 2.4 inch TFT Touch Screen Shield for Arduino

LCD 2.4 inch TFT Touch Screen Shield for Arduino

LCD 2.4 inch TFT Touch Screen for Arduino UNO !   Features & Specifications: ..

रo 672.00

3.5 inch TFT Display 480 X 320 Module With Touch Screen Panel - ILI9481 Driver IC

3.5 inch TFT Display 480 X 320 Module With Touch Screen Panel - ILI9481 Driver IC

This 3.5 inch TFT LCD Module can be can be easy controlled by MCU such as 8051, PIC, AVR, ARDUINO, a..

रo 1,585.00

5 inch TFT Display Module With Touch Screen Panel

5 inch TFT Display Module With Touch Screen Panel

5 inch TFT Display Module With Touch Screen Panel   Features: Resolution: 800..

रo 3,500.00 रo 4,375.00

Raspberry Pi 7inch Touch Screen Display with 10 Finger Capacitive Touch

Raspberry Pi 7inch Touch Screen Display with 10 Finger Capacitive Touch

Original Raspberry Pi 7inch Display, 800 x 480 pixel resolution, 10 finger multi-point touchscreen, ..

रo 7,730.00

7 inch TFT Display Module With Touch Screen Panel

7 inch TFT Display Module With Touch Screen Panel

7" TFT Display Module With Touch Screen Panel Comes with a driver board and is compatible with R..

रo 3,230.00

Raspberry Pi 2.2 inch TFT Display Module / WOT Touch

Raspberry Pi 2.2 inch TFT Display Module / WOT Touch

The PI-TFT22A module features a 2.2'display with 320x240 16-bit color pixels. This PI-TFT22A module ..

रo 2,906.00

2.8 TFT Touch Shield V2.0

2.8 TFT Touch Shield V2.0

This is a multifunctional Arduino/Seeeduino/Arduino Mega compatible resistive touch screen. It can b..

रo 2,653.00

Raspberry Pi 3 LCD 3.5 inch Touchscreen TFT Display Module

Raspberry Pi 3 LCD 3.5 inch Touchscreen TFT Display Module

This is compatible Raspberry Pi 2, 3 and B + Raspberry Pi motherboard and motherboard. B + B shall b..

रo 1,255.00 रo 1,465.00

Raspberry Pi HDMI LCD (10.1 inch)

Raspberry Pi HDMI LCD (10.1 inch)

  Raspberry Pi HDMI LCD (10.1 inch) is a IPS, 1280×800, 10.1 inch Capacitive Touch Screen LCD,..

रo 16,664.00

Waveshare 11870 10.1 inch HDMI LCD, 1024×600

Waveshare 11870 10.1 inch HDMI LCD, 1024×600

10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Features ..

रo 6,095.00 रo 7,253.00

3.5inch Touchscreen Shield

3.5inch Touchscreen Shield

Fully assembled 3.5inch display with 480×320 pixels TFT LCD and a resistive touch overlay. Just plug..

रo 3,643.00

Tags: Odroid, C1, 3.2inch, TFT, Touchscreen, Shield,

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments