The Tiny4412 uses Quad-Core A9 Exynos4412 SoC with scaling frequency up to 1.5GHz. The Exynos4412 integrates the Mali-400 MP GPU graphic engine with hardware support for 3D and can drive video playing on screens up to 1080P.

The Tiny4412 CPU board has four 2.0-mm pitch double-row headers (P1, P2, P3 and P4) among which P1 and P2 connect the Tiny4412 CPU board to a carrier board and extend most of the CPUs pins.

Specifications:

• CPU:
• CPU: Samsung Exynos4412, Cortex-A9 Quad-Core, 1.5GHz 
• Memory RAM: 1GB DDR3 RAM, 32bit data bus
• Flash: 4GB eMMC Flash(Optional 8/16/32GB eMMC Flash) Pin interface
• GPIO:
• 2 x 60 pin 2.0mm space DIP connector
• 2 x 34 pin 2.0mm space DIP connector 
• LED: 4 x User LED (Green), 2 x Power LED
• Power Supply: 2V to 6V
• PCB Size: 74 x 55 x 10 (mm), 8 layer
• Software support: Android 4.2 support, provide BSP source code
• Carrier Board:
• Name: Tiny4412 SDK Carrier Board, V1611
• Applicable CPU Board: Tiny4412 CPU board/Super 4412 CPU Board
• RS232 UART: 3 x TTL (UART 0,2, and 3), 3 x 2.54-mm pitch 4-Pin header (3.3V)
• SPI: 1 x SPI, 2.54-mm pitch 6-Pin header
• I2C: 4 x 2.54mm pitch 4-pin header
• USB Device: USB 2.0, 1 x MicroUSB
• HSIC: USB4640
• USB Host:
• USB Host1-2: USB A
• USB Host3: 2.54mm pitch, 4pin-header
• USB2.0 hub (compatible with USB 1.1)
• Audio In and Out:
• WM8960 CODEC
• Audio Recording and Playing
• 3.5mm earphone and audio jack
• onboard Microphone
• Class D amplifier output at CON7
• HDMI output
• Ethernet: 10/100M Ethernet interface(RJ45) using DM9621
• User Key: 4 x programmable LEDs populated from GPIOs
• RTC: onboard RTC battery
• ADC: 1 x ADC
• SDIO interface:
• 1 x SDIO, 2 x GPIO and 1 x UART
• Used to connect SD WiFi and BLE modules
• SD slot: 1 x Pop-up and SD slot
• CMOS Camera Interface: 2.54mm pitch double-row 20pin-header (1.8V)
• LCD interface:
• 2 x LCD interface
• Support one-wire technology
• Support backlight control
• Support capacitive touch
• Support RGB888 mode
• CPLD-JTAG: used to Flash CPLD firmware
• Switch:
• S1: power switch
• S2: boot switch
• PCB Size: 180x140mm
• Power Supply: DC-5V/2A

Documents:

• CPU Datasheet
• CPU board Schematic
• CPU board Dimension
• Carrier Board SDK schematic
• Carrier Board ADK Schematic

Package Includes:

• 1 x Tiny4412 CPU Board
• 1 x Tiny4412SDK Carrier Board
• 1 x X710
• 1 x LCD FPC Cable
• 1 x Acrylic Pad
• 1 x Serial Cable