Tang Nano 9K is an exquisite development board based on the Gowin GW1NR-9 FPGA chip featuring 6480 flip flops and an extended DRAM of 64Mbit. Compared to the predecessor Tang Nano 1K and Tang Nano 4K with about 1152 and 4608 LUTs respectively, Tang Nano 9K has pushed the limits to around 8640 LUT4 logic units. These logic units can not only be used for various complex logic circuit designs but also used for running a complete PicoRV soft-core. It meets various needs of users, such as learning FPGA, verifying softcore, and further design.

This board contains a USB Type-C interface for the power supply and downloading code. There is a  JTAG downloader on the FPGA board, so you can simply use a USB cable connected to the board to download the code without an extra downloader outside the board. 

It is equipped with an HDMI connector, RGB screen interface connector, SPI screen connector, 32Mbit SPI flash, and 6 LEDs. Tang Nano 9K loses the Cortex-M3 core and support for the OV2640 camera, but gains a MicroSD card, more display interfaces, a more complete debugger, and obviously extra logical units. 

Why use Tang Nano 9K to emulate?

  • To make sure the accuracy and reliability of the function of an FPGA chip
  • To shorten the time of launching an FPGA based product and reduce the costs
  • Please follow the User Guide documentation below to get started with Tang Nano 9K.

Applications:

  • Learning FPGA and Verifying an FPGA in Internetwork communication, AI, and Consumer Electronics. 
  • Verifying RISC-V based CPU for server, domestic appliance, Industrial, and thumb-sized sensors. 

Features:

  • GW1NR-9 FPGA: 8640 LUT4, 6480 FF(Flip-Flop)
  • Onboard 32M-bit SPI FLASH
  • Onboard JTAG Downloader 
  • More complete debugger: USB to JTAG & UART debugger 
  • Multiple development interfaces: HDMI interface, SPI screen interface, RGB screen interface
  • More functional Type-C connector: 5V Power supply & Code download
  • Small size, low-cost

Tang Nano Framework


Dimensions

Specification : 

Parameter Detail
ChipGowin GW1NR-9 FPGA with 8640 LUT4
Registers(FF)6480
ShadowSRAM17280
SSRAM(bits)
Block SRAM BSRAM468K
Number of B-SRAM26
User flash(bits)608K
SDR SDRAM(bits)64M
18 x 18 Multiplier20
External SPI FLASH32M-bit
Number of PLL2
DimensionsApproximately 65 x 23mm
Type-C Power supply 5V
Display interfaceHDMI interface, SPI screen interface, RGB screen interface
DebuggerOnboard BL702 chip provides USB-JTAG and USB-UART functions for GW1NR-9
IOSupport 4mA,8mA, 16mA, 24mA other driving capabilities
Provides independent Bus Keeper, pull-up/pull-down resistors, and Open Drain output options for each I/O
ConnectorTF card slot, 2x24P 2.54mm Header pads
Button2 programmable buttons for users 
LED

Onboard 6 programmable LEDs


ECCN/HTS

HSCODE
8543709990
UPC

Documentations:


Package Includes:

  • 1 x Tang Nano 9k board
  • 1 x Type-C Data Cable
  • 2 x 24 Pin header





Write a review

Please login or register to review

Tang Nano 9k FPGA board Gowin GW1NR-9 FPGA with 8640 LUT4 + 6480 flip flops

  • Brand: Seeed Studio
  • Product Code:Seeed-Tang-Nano-9k-FPGA-board
  • Reward Points:20
  • Availability:Out Of Stock
  • रo 1,986.00

  • Price in reward points:1986

Related Products

Nexys 3 Spartan-6 FPGA Trainer Board

Nexys 3 Spartan-6 FPGA Trainer Board

The Nexys 3 digital system development platform features the newest Spartan®-6 FPGA from Xilinx®, 48..

रo 36,985.00

TinyFPGA BX

TinyFPGA BX

  A tiny, low-cost, open FPGA dev board that packs a punch. The TinyFPGA BX brings the power..

रo 4,785.00

Sipeed TANG PriMER FPGA Development Board

Sipeed TANG PriMER FPGA Development Board

Tang features Anlogic EG4S20 FPGA – unrelated to Amlogic – which run a RISC-V softcore,  and all is ..

रo 2,440.00

Sipeed Tang Nano FPGA Board

Sipeed Tang Nano FPGA Board

This Sipeed Tang Nano FPGA board powered by GW1N-1 FPGA  board will be a nice choice for you to..

रo 787.00

Tags: Sipeed, FPGA, LUT

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments