PYNQ-Z2 is a FPGA development board based on ZYNQ XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from programmable logic and advanced ARM processor in ZYNQ, designers can build up more powerful embedded systems with it. Besides, the SoCs can be programmed in Python and the code can be developed and tested directly on the PYNQ-Z2. The programmable logic circuits are imported as hardware libraries and programmed through APIs in basically the same way that the software libraries are imported and programmed. PYNQ-Z2 board integrates Ethernet, HDMI Input/Output, MIC Input, Audio Output, Arduino interface, Raspberry Pi interface, 2 Pmod, user LED, push-button and switch. It is designed to be easily extensible with Pmod, Arduino, and peripherals, as well as general purpose GPIO pins.

What is PYNQ? PYNQ (Python On Zynq) is an open-source project from Xilinx® that makes it easy to design embedded systems with Xilinx Zynq® Systems on Chips (SoCs). Using the Python language and libraries, designers can exploit the benefits of programmable logic and microprocessors in Zynq to build more capable and exciting embedded systems. PYNQ users can now create high performance embedded applications with: parallel hardware execution, high frame-rate video processing, hardware accelerated algorithms, real-time signal processing, high bandwidth IO, low latency control. PYNQ utilizes the best advantages of ZYNQ and Python. It has been widely used for machine learning research and prototyping. Use this board with our DF Arduino or Raspberry Pi expansion shield, ultimate possibilities waiting for you!

SPECIFICATION :

Outline Dimension: 87mm*140mm/3.43”*5.51”

ZYNQ XC7Z020-1CLG400C Board:

650MHz dual-core Cortex-A9 processor

DDR3 memory controller with 8 DMA channels and 4 High-Performance AXI3 Slave ports

High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO

Low-bandwidth peripheral controller: SPI, UART, CAN, I2C

Programmable from JTAG, Quad-SPI flash, and MicroSD card

Programmable logic equivalent to Artix-7 FPGA

13,300 logic slices, each with four 6-input LUTs and 8 flip-flops

630 KB of fast block RAM

4 clock management tiles, each with a phase locked loop (PLL) and mixed-mode clock manager (MMCM)

220 DSP slices

On-chip analog-to-digital converter (XADC)

Memory:

512MB DDR3 with 16-bit bus @ 1050Mbps

16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifier

MicroSD slot

Power: Powered from USB or 7V-15V external power source

USB and Ethernet:

Gigabit Ethernet PHY

Micro USB-JTAG Programming circuitry

Micro USB-UART bridge

USB OTG PHY (supports host only)

Audio and Video:

HDMI sink port (input)

HDMI source port (output)

I2S interface with 24bit DAC with 3.5mm TRRS jack

Line-in with 3.5mm jack

Switches, Push-buttons, and LEDs:

4 push-buttons

2 slide switches

4 LEDs

2 RGB LEDs

Expansion Connectors:

Two standard Pmod ports

16 Total FPGA I/O (8 shared pins with Raspberry Pi connector)

Arduino Shield connector

24 Total FPGA I/O

6 Single-ended 0-3.3V Analog inputs to XADC

Raspberry Pi connector

28 Total FPGA I/O (8 shared pins with Pmod A port)

Useful Links :

More Documents

Package Includes :

1 x PYNQ-Z2 Development Board

PYNQ-Z2 Development Board

Brand: DFRobot
Product Code:DFR-PYNQ-Z2-Development-Board
Reward Points:219
Availability:In Stock

रo 21,715.00
Price in reward points:21890
2 or more रo 21,540.00
3 or more रo 21,365.00
6 or more रo 21,190.00

Qty

0 reviews / Write a review

Write a review

PYNQ-Z2 Development Board

रo 21,715.00

Related Products

Parallella-16 : A high performance single board parallel processing computer

Nexys 3 Spartan-6 FPGA Trainer Board

Nexys 4 DDR Artix-7 FPGA: Trainer Board

Parallella-16 Porcupine Board

XLR8: Arduino-compatible FPGA-based Application Accelerator

TinyFPGA BX

Xilinx FPGA Development Board Spartan-6

TinyFPGA A1

TinyFPGA A2

TinyFPGA B2

TinyFPGA Programmer

TinyFPGA AX2

Make - FPGAs

Learning FPGAs

Spartan Edge Accelerator Board - Arduino FPGA Shield with ESP32

Coral System-on-Module (SoM)