The Nexys 3 digital system development platform features the newest Spartan®-6 FPGA from Xilinx®, 48Mbytes of external memory (including two non-volatile phase-change memories from Micron®), and enough I/O devices and ports to host a wide variety of digital systems. The Nexys 3 is an ideal platform for any engineer to gain experience with Xilinx's latest technologies, and it is perfectly suited to the classroom - new students can build logic circuits without worrying about complex external interfaces, and more advanced students can build complete digital systems, including controllers, CODECs, and embedded processors.
The on-board Adept high-speed USB2 port provides board power, FPGA programming, and user-data transfers at rates up to 38Mbytes/sec. A large collection of low-cost peripheral boards, including more than 30 Pmods and several new Vmods, can add additional features to the Nexys 3, including A/D and D/A converters, breadboards, motor drivers, displays, etc. The Nexys 3 is fully compatible with all Xilinx tools, including the free WebPACK™ as well as ChipScope™, EDK (embedded processor design kit), and other tools.
The Nexys 3 is no longer in production and is not recommended for new installations. When the current stock is depleted, it will be discontinued. We suggest migration to the Nexys 4 DDR.
Stats:
Processor/IC: Xilinx Spartan-6 XC6LX16-CS324
Connector(s):
- USB2 port
- High-speed 40-pin VHDC expansion connector
- Four 12-pin Pmod ports
- 8-bit VGA
- 10/100 Ethernet
Programming: Digilent USB2 port providing board power, programming, and data transfers
Features:
- Xilinx Spartan-6 XC6LX16-CS324
- 16Mbyte Micron Cellular RAM
- 16Mbyte Micron Parallel PCM
- 16Mbyte Micron Quad-mode SPI PCM
- 100 MHz fixed-frequency oscillator
- Rugged plastic case and USB cable included
- Digilent Adept USB port for power, programming, and data transfers
- 10/100 SMSC LAN8710 PHY
- USB-UART
- Type-A USB host for mouse, keyboard, or memory stick
- 8 slide switches, 5 push buttons, 4-digit 7-segment display, 8 LEDs
- Four double-wide Pmod ports
- One 40-pin VHDC connector
- 8-bit VGA
What's
|
|
Nexys 3 Spartan-6 FPGA Trainer Board
- Product Code:DGL-Nexys-3-Spartan-6-FPGA
- Reward Points:370
- Availability:Back-order
-
रo 36,985.00
- Price in reward points:36985
Related Products
freeSoC Mini Development Kit
All the power of freeSoC, in a 40-pin DIP form factor. Imagine having the power of an FPGA, the ..
रo 7,439.00
Nexys 4 DDR Artix-7 FPGA: Trainer Board
The Nexys 4 DDR is a drop-in replacement for our cellular RAM-based Nexys boards. Featuring the same..
रo 51,094.00
XLR8: Arduino-compatible FPGA-based Application Accelerator
What is XLR8? XLR8 is a drop-in replacement for an Arduino Uno, but with a twist. It is an Ardui..
रo 9,703.00
TinyFPGA BX
A tiny, low-cost, open FPGA dev board that packs a punch. The TinyFPGA BX brings the power..
रo 4,785.00
Xilinx FPGA Development Board Spartan-6
Xilinx FPGA: ----Spartan-6(XC6SLX9-2TQG144C) CLK:----50 MHZ SPI FLASH: M25P16 / Config..
रo 3,000.00
Make - FPGAs
All Indian Reprints of Maker Media are printed in Grayscale. What if you could use softwar..
रo 475.00
Learning FPGAs
Learn how to design digital circuits with FPGAs (field-programmable gate arrays), the devices that r..
रo 650.00
PYNQ-Z2 Development Board
PYNQ-Z2 is a FPGA development board based on ZYNQ XC7Z020 FPGA, intensively designed to suppor..
रo 21,715.00
Spartan Edge Accelerator Board - Arduino FPGA Shield with ESP32
Spartan Edge Accelerator Board is a Xilinx Spartan FPGA development board in the Arduino UNO shield ..
रo 4,692.00
Tang Nano 9k FPGA board Gowin GW1NR-9 FPGA with 8640 LUT4 + 6480 flip flops
Tang Nano 9K is an exquisite development board based on the Gowin GW1NR-9 FPGA chip featuring 6480 f..
रo 1,986.00
