The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

Specifications:

• Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU
• Radio module u-blox NINA-W102
• Board Power Supply (USB/VIN) 5V
• Secure Element ATECC508
• Supported Battery Li-Po Single Cell, 3.7V, 1024mAh Minimum
• Circuit Operating Voltage 3.3V
• Digital I/O Pins 8
• PWM Pins 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
• UART - 1
• SPI - 1
• I2C - 1
• Analog Input Pins 7 (ADC 8/10/12 bit)
• Analog Output Pins 1 (DAC 10 bit)
• External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
• DC Current per I/O Pin 7 mA
• CPU Flash Memory 256 KB (internal)
• SRAM 32 KB
• EEPROM no
• Clock Speed 32.768 kHz (RTC), 48 MHz
• LED_BUILTIN 6
• USB Full-Speed USB Device and embedded Host
• Length 61.5 mm
• Width 25 mm
• Weight 32 gr.

Documents:

• Schematic Diagram

Package Includes:

• 1 x Arduino MKR WiFi 1010 IoT Board