This Arducam IMX219 camera module is mainly designed for NVIDIA Jetson Nano/Xavier NX and also can be used on other hardware like ARM, DSP, FPGA, etc. The highlight of this camera is its wide field of view.

Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera into NVIDIA Jetson Orin kernel.

The lens on this camera is not interchangeable, if you need to replace the lens, please contact sales in advance!

KERNEL CAMERA DRIVER USED

This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.

SUPPORTED PLATFORM DISCLAIMER

This camera is specifically designed for the official NVIDIA Jetson Developer Kit by default and does not support third-party carrier boards.

ADDITIONAL ACCESSORY INSTRUCTIONS

The 15-22 pin FPC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0472) is required.

Features:

More Than HD: This camera adopts 1/4” 8 Megapixel IMX219 sensor for sharp image, Max. still resolution is 3280 x 2464 pixels.
Wider Angle of View: This camera module has 220°(H) wide-angle M12 Lens, which provides a much wider Field of View compared to the stock lens on V2 camera module.
IR Sensitivity: Integral IR filter, visible light only; Focal Length: 0.76 mm

Specifications:

Camera

Image Sensor	IMX219
Still Resolution	8 Megapixels
Video Modes	NVIDIA Jetson Nano/Xavier NX/Orin NX/Orin Nano/AGX Orin: 3280x2464@21fps, 3280x1848@28fps, 1920x1080@30fps, 1640x1232@30fps, 1280x720@60fps
Sensor Resolution	3280 × 2464 pixels
Sensor image area	3.68 x 2.76 mm (4.6 mm diagonal)
Pixel Size	1.12 µm x 1.12 µm
Optical Size	1/4"
IR Sensitivity	Integral IR-cut Filter, visible light only

Lens

FOCUS TYPE	FIXED FOCUS
Focal Length	0.76mm
F.NO	F2.1
Field of View(FOV)	220°(H)
Lens Mount	M12 Mount

Electrical & Mechanical

Camera Board size	25 x 24 mm
Peaking Current	300mA

Documentations:

Package Includes:

1 x Arducam IMX219 Camera Module with fisheye lens for NVIDIA Jetson Nano/Xavier NX
1 x 15cm 15pin FPC cable
1 x 30cm 15pin-22pin FPC cable

Processor Specifications
Interface	MIPI CSI-2 2-lane/4-lane
Sensor Specifications
Sensor type	Sony 8MP IMX219 Sensor
Sensor size	1/4 inch
Lens Specifications
Focal Length	0.76mm
Angle of View	220(H)
Additional Information
Warranty	90 days