This Arducam IMX219 fisheye lens camera module is designed mainly for Raspberry Pi V2 camera board and Nvidia Jetson Nano, replacing the default standard IMX219 camera module to get a much wide field of view. It can be used for drones, robots, action cameras, and 3D scanning applications.

KERNEL CAMERA DRIVER USED

This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.

SUPPORTED PLATFORM DISCLAIMER

This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.

ADDITIONAL ACCESSORY INSTRUCTIONS

The 15-22 pin FPC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0472) is required.

Blog：

Arducam Introduces 8MP IMX219 Auto Focus, Wide Angle, Zero-Distortion and Spy Camera to the NVidia Jetson Nano
Use M12 Lenses on Raspberry Pi Camera V2 with Ease for Wide Angle, Telephoto and Macro Shooting, or Even Turn It into a Spy Camera

Video：

Arducam IMX219 Drop in Replacement Sensor Module for Raspberry Pi Camera Module V2 Pi 4 Compatible

Specifications:

Camera

Image Sensor	IMX219
Still Resolution	8 Megapixels
Video Modes	1080p47, 1640 × 1232p41 and 640 × 480p206
Sensor Resolution	3280 × 2464 pixels
Sensor image area	3.68 x 2.76 mm (4.6 mm diagonal)
Pixel Size	1.12 µm x 1.12 µm
Optical Size	1/4"
IR Sensitivity	Integral IR-cut Filter, visible light only

Lens

FOCUS TYPE	MANUAL FOCUS
Focal Length	0.76mm
F.NO	F2.1
Field of View(FOV)	220°(H)
Lens Mount	M12 Mount

Electrical & Mechanical:

Peaking Current

300mA

Applications:

Robots, Drones
Action Cameras
3D scanning applications
Field animal camera
Recording slow motion
Machine vision, etc.

Note:

The package does not include any Raspberry Pi motherboard.
The drop-in replacement module does not include FPC cables and any camera boards. And it requires the use of the Raspberry Pi V2 camera board to function properly.
The lenses of all camera modules are not interchangeable. Please contact sales in advance if you need to replace them.
Note for Supported Platforms and Os

PLATFORM	BOOKWORM(LIBCAMERA)	BULLSEYE(LIBCAMERA)	BUSTER(RASPISTILL)
Raspberry Pi 3/4/5	√	√
Raspberry Pi CM3/CM4	√	√	√

Documentations:

Package Includes:

1 x Arducam B0286 IMX219 Camera Module with fisheye lens

Processor Specifications
Interface	MIPI CSI-2 2-lane/4-lane
Sensor Specifications
Sensor type	Sony 8MP IMX219
Sensor size	1/4 inch
Lens Specifications
Focal Length	0.76mm
Angle of View	220(H)
Additional Information
Warranty	90 days