Arducam just released this High-Quality camera module for Jetson Nano/Xavier NX, a camera board with 3-hole pitches. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications are required, just install the driver and you are good to go.
KERNEL CAMERA DRIVER USED
- This camera relies on kernel drivers to work – one kernel version, one camera driver. Please refer to the Supported JetPack Version for Different NVIDIA Jetson Platforms to ensure compatibility.
SUPPORTED PLATFORM DISCLAIMER
- This camera is specifically designed for the official NVIDIA® Jetson™ Developer Kit by default and does not support third-party carrier boards.
ADDITIONAL ACCESSORY INSTRUCTIONS
- The 22-22 pin FPC Cable is included in the package. But please note that: If you are using an AGX Orin, an additional camera adapter (B0473) is required.
Features:
- A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount.
- Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
- Only a driver away from Plug-and-Play - The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson driver, which could bring potential damage and void the warranty. Ours don't.
- 4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with a 4-lane CSI connector and future 4-lane camera driver updates.
Specifications:
Camera
Electrical & Mechanical
Lens Options
CS-Mount Lens
SKU | |||||||
Part No | CS17320M12 | CS2316ZM02 | CS2308ZM05 | CS2008ZM05A | CS1812ZM03 | CS2325ZM01 | CS1806ZM06 |
Optical Format | 1/1.7″ | 1/2.3' | 1/2.3'' | 1/2.3'' | 1/2.3'' | 1/2.3'' | 1/2.3'' |
EFL(mm) | 3.2 | 16.00 | 8.00 | 8.00 | 12.00 | 25.00 | 6.00 |
BFL(mm) | 5.94 | 7.53 | 6.50 | 7.53 | 7.53 | 8.03 | 8.03 |
F/NO | 2.0 | 1.2 | 1.4 | 1.2 | 1.6 | 1.2 | 1.4 |
HFOV on 1/2.3‘’ Cam | 120° | 24° | 50° | 50° | 30° | 14° | 65° |
MOD | 0.3m | 0.20m | 0.30m | 0.20m | 0.20m | 0.20m | 0.30m |
Size(mm) | 28×30 | 30×29 | 28×23 | 30×29.5 | 30×29 | 28×29 | 28×28.5 |
NOTE: The CS-Mount Lens kit for the HQ Camera module, please check LK004, 5 lenses are included.
C-Mount Lens
SKU | LN043 | LN044 | LN045 | LN047 | |||||||
Part No | C2308ZM50 | C1550ZM01 | C1535ZM02 | C20280M12 | C2004ZM12 | C1016ZM02 | C1705ZM07 | C1508ZM04 | C1512ZM03 | C1516ZM02 | C1535ZM01 |
Optical Format | 1/2.3″ | 2/3″ | 2/3″ | 1/2" | 1/2" | 1'' | 1/1.7" | 2/3" | 2/3" | 2/3" | 2/3" |
EFL(mm) | 8-50 | 50.00 | 35.00 | 2.8-12 | 4-12 | 16.00 | 5.00 | 8.00 | 12.00 | 16.00 | 35.00 |
BFL(mm) | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 | 17.53 |
F/NO | 1.4 | 1.8-16 | 1.6-16 | 1-1.6 | 1-1.6 | 1.4-1.6 | 1.6-16 | 1.6-16 | 1.6-16 | 1.6-16 | 1.7-16 |
HFOV on 1/2.3‘’ Cam | 45°-5.35° | 7° | 18° | 120°-38° | 80°-32° | 24° | 65° | 44° | 31° | 24° | 10° |
MOD | 0.2m | 0.50m | 0.30m | 0.30m | 0.20m | 0.20m | 0.15m | 0.15m | 0.20m | 0.20m | 0.20m |
Size(mm) | 40 x 68.3 | 34×40.5 | 50×35.5 | 44.5×58.5 | 33×43 | 39×50 | 39×41.5 | 39×41 | 34×41.5 | 33×36.5 | 35×30 |
NOTE : For the sample order, please order the lens you need to replace separately and Contact us in advance for customization if you would like to replace the lenses in bulk.
Note:For the new version(R32 4.4), please refer to the following link:
https://github.com/ArduCAM/MIPI_Camera/releases
IMPORTANT NOTE
- C/CS Lens is NOT INCLUDED.
- Pi 2/3/4/Zero WON’T WORK WITH IT. ONLY THE COMPUTE MODULES DO.
- The camera driver MUST be installed: https://github.com/ArduCAM/MIPI_Camera/tree/master/Jetson//driver
- It can't work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).
Package Includes:
- 1 x 12.3MP camera board with a dust cap for Jetsons
- 1 x 11.8"(300mm) 15pin-22pin FPC Flexible camera cable
- 1 x 11.8"(300mm) 22pin-22pin FPC Flexible camera cable
Arducam B0279 for Jetson 12.3MP 477P HQ Camera Board for Nvidia Jetson Nano/Xavier NX
- Brand: ArduCAM
- Product Code:ArdC-B0279-Camera
- Reward Points:52
- Availability:In Stock
- रo 5,021.00
-
रo 4,393.00
- Price in reward points:5230
-
- 5 or more रo 4,979.00
- 15 or more रo 5,000.00
- 25 or more रo 4,937.00
Related Products
Tags: Arducam, Camera Board, Nvidia Jetson