Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it).

The Adafruit ATWINC1500 WiFi Shield uses SPI to communicate plus some GPIO for control, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works best with SAMD21-based boards like the Arduino Zero or Metro M0 Express, or the Arduino Mega. It works OK on Uno but uses nearly all the memory so it may be a challenge to build complex projects. It will not work/fit on other Arduinos such as 32u4-based or attiny-based boards. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.

This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support! This version of the shield comes with a uFL connector that can be used to attach external antennas. If you want to keep it simple, check our the PCB trace antenna version here.

These SPI-protocol WiFi module are currently the best way to add WiFi to your Arduino-compatible so we've decided to make a handy shield for it. The shield comes with level shifting on all the input pins so you can use it with 3V or 5V logic boards. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.

We also tossed on a micro SD card socket, you can use that to host or store data you get from the Internet. Arduino's based on the ATmega328 (like the UNO) cannot use both the WiFi module and SD library at the same time, they're too small. Upgrade to a Metro M0 Express to get a big memory bump!

 

Write a review

Please login or register to review

Adafruit 3654 WINC1500 WiFi Shield with uFL Connector

  • Brand: Adafruit
  • Product Code:Ada-WIN-1500-WiFi-Shield-uFL-Connector
  • Reward Points:28
  • Availability:In Stock
  • रo 2,693.00

  • Price in reward points:2841

  • 50 or more रo 2,357.00
  • 60 or more रo 2,347.00

Related Products

Arduino Due

Arduino Due

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the f..

रo 5,171.00

UFL/IPX to SMA Female RG178 Pigtail Cable Connector

UFL/IPX to SMA Female RG178 Pigtail Cable Connector

UFL/IPX to SMA Female RG178 Pigtail Cable Connector. Connects internal WiFi to external WiFi Booster..

रo 135.00

Blend - BLE+Arduino Development Board

Blend - BLE+Arduino Development Board

Blend is an integrated development board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (a..

रo 2,395.00 रo 2,985.00

Yun Shield for Arduino

Yun Shield for Arduino

Yun Shield is one of the most powerful shields for Arduino Board. Yun Shield is designed to add Inte..

रo 3,587.00

Blend 2 - BLE + Arduino Development Board

Blend 2 - BLE + Arduino Development Board

Blend is very popular as it is a "full-size" Arduino compatible board which supports most shields. I..

रo 2,985.00

Wifi Shield (Fi250) V1.1

Wifi Shield (Fi250) V1.1

Wifi Shield (Fi250) V1.1 is a economic internet solution with Arduino. The Wi-Fi module support IEEE..

रo 2,428.00

Adafruit 1272 Ultimate GPS Logger Shield - Includes GPS Module

Adafruit 1272 Ultimate GPS Logger Shield - Includes GPS Module

Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shiel..

रo 3,232.00

Adafruit 4285 AirLift Shield - ESP32 WiFi Co-Processor

Adafruit 4285 AirLift Shield - ESP32 WiFi Co-Processor

Give your Arduino project a lift with the Adafruit AirLift Shield - a shield that lets you use the p..

रo 1,430.00 रo 1,614.00

Adafruit 5319/17 FGG.0B Quick Connect 4/5 Pin Panel Mount Socket - 9mm

Adafruit 5319/17 FGG.0B Quick Connect 4/5 Pin Panel Mount Socket - 9mm

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 4/5-pin So..

रo 1,074.00

Adafruit 5318/16 FGG.0B Quick Connect 4/5 Pin Plug - 9mm Outer Diameter

Adafruit 5318/16 FGG.0B Quick Connect 4/5 Pin Plug - 9mm Outer Diameter

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 4/5-pins P..

रo 1,074.00

Adafruit 5483 ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Adafruit 5483 ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

We've got a new machine here at Adafruit, it can uncover your deepest desires. Don't believe me? I'l..

रo 2,693.00

iPEX to RP-SMA Connector

iPEX to RP-SMA Connector

This is an iPEX to RP-SMA Female connector for LoRa antenna and  RAK833-SPI or R..

रo 744.00

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 8..

रo 2,693.00

Tags: Adafruit, WINC1500, WiFi, Shield, uFL, Connector

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments