If you've ever made a mistake when surface-mount soldering, you'll know how much of a pain it can be to fix it without the right tools. It can add critical time to a project and can seriously stymie your soldering momentum if you run into a bad component or a faulty reflow. With the Quick 861DW Soldering Station, you can easily rework your boards and get your project back on track. It's also possible to use solder paste (in a syringe for example) to apply paste and then blow hot air over it to melt the solder and get the components into place.

This powerful station has an internal pump and heater to blow a steady stream of temperature controlled hot air to make it super easy to remove components, fix joints and jumpers, replace missing components, or just correct something you've done wrong.

The Quick 861DW matches up performance with hot air stations that cost twice as much! It's great for beginners to experts thanks to its super-fast heat up time and easy to use button interface. You can save and restore 'profiles' so you have one for lead-free, lead, small chips or large. Comes with a nice stand and three different nozzles for different sized parts.

It has a closed-loop temperature control range between 100-500°C (212-932°F) and a digital display so you can easily tell what temperature the air's blowing at. It has a power consumption of 1000W and an intelligent cooling system, so the airflow remains on until it gets to below 100°C. Max air flow is 100 L/minute - but for most work you'll want to keep it a lot lower than that.

Just make sure to let the rework station heat up all the way before using it and be careful to use tools (and not your hands!) when using as it spits out, well, really hot air. Comes with three nozzles, use the smallest size you can get away with - it helps avoid damaging other components if you are trying to isolate one part of the board while avoiding a connector, for example.


Specifications:

  • Hose Length: 105 cm / 41.5 inch
  • Mains power 120VAC
  • Outer Diameters of Three Nozzles:
  • 5mm / 0.19 inch
  • 6mm / 0.23 inch
  • 8mm / 0.31 inch
  • The manual mentions 200V but this is the 120V version
  • Product Dimensions: 245.0mm x 188.0mm x 135.0mm / 9.6 inch x 7.4 inch x 5.3 inch

Documents:

Package Includes:

  • 1 x Adafruit 3941 Quick 861DW Hot Air Soldering Rework Station w/ Three Nozzles

Write a review

Please login or register to review

Adafruit 3941 Quick 861DW Hot Air Soldering Rework Station w/ Three Nozzles

  • Brand: Adafruit
  • Product Code:NR-Ada-Quick-861DW-Hot-Air-Soldering
  • Reward Points:425
  • Availability:In Stock
  • रo 40,339.00

  • Price in reward points:42551

  • 3 or more रo 40,169.00

Related Products

Soldron Soldering Iron -25W

Soldron Soldering Iron -25W

Generally used for most of the components soldering. Compatible with most of the soldering Iron tips..

रo 195.00

USB Soldering Iron 5VDC / 8W

USB Soldering Iron 5VDC / 8W

Portable USB powered soldering iron with quick heating up makes it perfect for SMD soldering work ! ..

रo 1,000.00

VAR TECH 700 ESD Soldering and SMD rework station 2 in 1 Heavy duty

VAR TECH 700 ESD Soldering and SMD rework station 2 in 1 Heavy duty

VAR TECH 700 is the Perfect Combination of 936A Soldering Station and 850A S.M.D. Re-Work Station wh..

रo 9,260.00

Fully Adjustable PCB Clamp Holder - Pro's Kit SN-390

Fully Adjustable PCB Clamp Holder - Pro's Kit SN-390

Got a big ol' clunky circuit board that needs rework but is too big for your standard everyday vise?..

रo 1,915.00 रo 2,110.00

Adafruit 5253 Metal Rework Station Stand with Two Clips and Four PCB Holders

Adafruit 5253 Metal Rework Station Stand with Two Clips and Four PCB Holders

This mini rework station is great for electronic work and repair. These were initially marketed for ..

रo 3,232.00

Adafruit 5286 Hot Air Helper Rework Station Plate with Two Ring Clamps

Adafruit 5286 Hot Air Helper Rework Station Plate with Two Ring Clamps

There's always that point in a hot-air rework session where you're just holding the wand and thinkin..

रo 3,232.00

Adafruit 1869 Hot Air Soldering Rework Station w/ Three Nozzles - Quick 957DW+

Adafruit 1869 Hot Air Soldering Rework Station w/ Three Nozzles - Quick 957DW+

If you've ever made a mistake when surface-mount soldering, you'll know how much of a pain it can be..

रo 16,857.00

Adafruit 5725 Quick NK-850 Hot Air Rework Conversion Nozzle

Adafruit 5725 Quick NK-850 Hot Air Rework Conversion Nozzle

If you've ever made a mistake when surface-mount soldering, you know how much of a pain it can be to..

रo 1,340.00

Tags: Adafruit, Quick, Hot Air, Soldering Rework Station, Nozzles

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments