They're bright, they're white, they light up the night - look at them too close and you may get spots in your sight... This is a Single Color, Double-Sided LED strip with 336 bright 2.6mm x 3.2mm white LEDs adorning both surfaces of a 6mm wide, 1 meter long LED strip.

We particularly like these strips because they are both incredibly bright, and provide near-360-degree illumination, with a thin strip so it can easily be integrated into any design.

• This variant of the strip has ~3000K warm white LEDs, so it's good for cozy incandescent-like lighting effects.
• This variant of the strip has ~6000K cool white LEDs, so it's good for clean, modern lighting effects.
  

Each order gets a 1-meter long strip with 2 power wires in red & black. Provide 9V (bright) to 12V (very bright!) and the strip starts to glow. The whole strip draws about 950 milliAmps maximum at 12V, 275mA at 9V. You can cut this strip down if you need to, and even re-solder to it - there's cuttable sections every 17.5mm with solder nubs.

Note these are not 'NeoPixel' LED strips; you cannot turn on or off individual LEDs. This guide on analog RGB LED strip control will show you how it works - you'll want a microcontroller with a PWM output, and N-MOSFETs or a ULN2803 to control the power to the entire LED element.

Technical Details:

Overall LED strip dimensions:

• 1000mm length x 6mm width x 1.8mm height

Package Includes:

• 1 x Adafruit 5860/5864 Double-Sided Single Color 12V LED Strip 1m