These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
This button is a momentary push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.
Specifications:
- Drill hole diameter: 16mm
- Switch rating: 3A / 250VDC
- Switch contacts: 1 NO, 1 NC
- Material: Chrome plated brass
- Contact resistance: < 50 mOhm
- Insulation resistance: > 1000 Mohm
- Temperature: -20 C to +55 C
- Mechanical life: > 500,000
- Electrical life: > 50,000
- Panel thickness: 1-13mm
- Operating pressure: 1.5 - 2.5 N
- Operating stroke: 2mm
- Lamp rated voltage: 6V
Warranty: 30 days
- Warranty will not apply if Product fails or is damaged after delivery to you due to accident, abuse or misuse.
Package Includes:
- 1 x Adafruit 481 / 558 / 559 / 560 Rugged Metal Pushbutton with Blue / White / Red / Green LED Ring - 16mm
Adafruit 481 / 558 / 559 / 560 Rugged Metal Pushbutton with Blue / White / Red / Green LED Ring - 16mm
- Brand: Adafruit
- Product Code:Ada-Pushbutton-LED-16mm
- Reward Points:6
- Availability:In Stock
-
रo 534.00
- Price in reward points:564
-
- 50 or more रo 468.00
- 285 or more रo 466.00
Available Options
Related Products
Tags: Pushbutton, Metal, LED, 16mm