Breathe easy, knowing that you can track and sense the quality of the air around you with this Adafruit PMSA003I Air Quality Breakout. This sensor is great for monitoring air quality, in a compact plug-in format.
 
Best of all, unlike almost all other sensors we've seen that are UART interface, this one is I2C interface, which makes it a great match for single board Linux computers like Raspberry Pi, or even plain Arduino UNO's that normally would use software serial.
 
If you're an I2C fan (who isn't?), we've included two of our handy dandy SparkFun Qwiic compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Plug and play with other 'QT boards and sensors to add quick air quality sensing.
 
This sensor uses laser scattering to radiate suspending particles in the air, then collects scattering light to obtain the curve of scattering light change with time. The microprocessor calculates equivalent particle diameter and the number of particles with different diameters per unit volume.
 
The I2C data stream updates once per second, you'll get:
 
PM1.0, PM2.5 and PM10.0 concentration in both standard & environmental units
Particulate matter per 0.1L air, categorized into 0.3um, 0.5um, 1.0um, 2.5um, 5.0um and 10um size bins
As well as checksum, in binary format.
 
Each order comes with one fully assembled sensor module breakout, including some header if you'd like to solder it to a breadboard. The breakout board has a 5V mini boost circuit so you can power it from 3.3V and 5V and the motor will run just fine
 
 
 
Technical Details:
 
Sensor module specifications:
  • Particle Range of measurement: 0.3~1.0,1.0~2.5, 2.5~10 Micrometer
  • Particle Counting Efficiency: 50% @ 0.3μm 98% @ >=0.5 μ m
  • Particle Effective Range (PM2.5 standard): 0~500 μ g/m ³
  • Particle Maximum Range (PM2.5 standard):  ≥ 1000 μ g/m ³
  • Particle Resolution: 1 μ g/m ³
  • Particle Maximum Consistency Error (PM2.5 standard): ± 10% @ 100~500 μ g/m ³
  • ±10 μ g/m ³ @0~100 μ g/m ³
  • Particle Standard Volume 0.1 Liter
  • Single Response Time <1 second
  • Total Response Time ≤ 10 seconds
  • DC Power Supply Typ: 5.0V Min: 4.5V Max: 5.5V
  • Active Current ≤ 100 mA
  • Standby Current ≤ 200 μ A
  • Interface Level: 3.3V logic, L <0.8V,  H >2.7V
  • Working Temperature Range -10 ~ 60 ℃
  • Working Humidity Range 0~99%
  • Storage Temperature Range -40 ~ 80 ℃
  • MTTF ≥ 3 Year
  • I2C address 0x12 (cannot be changed)
Product Dimensions: 51.0mm x 35.5mm x 13.6mm / 2.0" x 1.4" x 0.5"
Product Weight: 28.0g / 1.0oz
 
Package Includes:
  • 1 x  Adafruit 4632 PMSA003I Air Quality Breakout - STEMMA QT / Qwiic

 

Write a review

Please login or register to review

Adafruit 4632 PMSA003I Air Quality Breakout - STEMMA QT / Qwiic

  • Brand: Adafruit
  • Product Code:Ada-4632-Air-Quality-Breakout
  • Reward Points:51
  • Availability:In Stock
  • रo 4,851.00

  • Price in reward points:5118

  • 30 or more रo 4,831.00
  • 50 or more रo 4,228.00

Related Products

Grove - Air quality sensor v1.3

Grove - Air quality sensor v1.3

The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alc..

रo 640.00

Adafruit 3566 CCS811 Air Quality Sensor Breakout - VOC and eCO2

Adafruit 3566 CCS811 Air Quality Sensor Breakout - VOC and eCO2

Breathe easy - we finally have an I2C VOC/eCO2 sensor. Add air quality monitoring to your project an..

रo 1,905.00 रo 1,985.00

Air Quality Monitor (PM 2.5, Formaldehyde, Temperature and Humidity Sensor)

Air Quality Monitor (PM 2.5, Formaldehyde, Temperature and Humidity Sensor)

This is a multifunction air quality monitor that can be detected not only the concentration of parti..

रo 3,813.00 रo 4,394.00

Gravity: Air Quality Sensor - CCS811

Gravity: Air Quality Sensor - CCS811

Gravity: CCS811 Air Quality Sensor can measure the eCO2 (equivalent CO2) and TVOC (Total Volatile Or..

रo 1,183.00 रo 1,364.00

Adafruit 4701 ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic

Adafruit 4701 ST25DV16K I2C RFID EEPROM Breakout - STEMMA QT / Qwiic

This RFID tag is really unique: it works with mobile phones just like other RFID tags, but you can r..

रo 426.00

Grove - Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas, Humidity, Pressure and Temperature sensor

Grove - Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas, Humidity, Pressure and Temperature sensor

BME688 is the first gas sensor with Artificial Intelligence(AI) and integrated high-linearity and hi..

रo 2,386.00

Adafruit 5896 SHT45 Trinkey - USB Temperature and Humidity Sensor

Adafruit 5896 SHT45 Trinkey - USB Temperature and Humidity Sensor

It's half USB Key, half temperature-humidity sensor... it's the Adafruit SHT45 Trinkey. We wanted to..

रo 1,937.00

Adafruit 5989 HDC3021 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Adafruit 5989 HDC3021 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

We stock a large number of Temperature/Humidity sensors, so you're probably wondering why another on..

रo 966.00

Tags: PMSA003I, Air, Quality, STEMMA, QT, Qwiic

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments