• HiFi Shield 2

Works with the ODROID-C2 / C1+. This is not compatible with the original ODROID-C1.

The HiFi Shield Plus provides both stereo RCA connectors to connect to external amplifiers and other audio equipment. Via TI's high-end PCM5242 DAC chip(known as Burr-Brown), it supports 16, 24, 32 bit audio formats with minimal THD+N ratio (0.002%) and ideal dynamics (114dB+), plus amazing sampling rates of 384kHz

One dedicated S/PDIF interface supports up to 192kHz/24bit resolution via Optical (Toslink) output.

Using the I2S expansion port on the C2 / C1+, we save a USB port and allow the user to select their audio playback system of choice, such as Volumio, Debian(DietPi) for HiFi audio playback. 
 

Functional introduction :

1. Volume control via I2C interface is great feature to keep the great audio quality with various audio output volume. 

2. The output ports include gold-plated stereo RCA terminals

3. An ultra-low noise dropout regulator is populated for the power supply, significantly reducing power supply noise and greatly increasing the signal to noise ratio.

4. The I2S interface allows for direct decoding of the digital input to analog output using master clock synchronization.

5. The PCB surface is comprised of gold-plating on top of 2 oz. of copper, ensuring signal continuity and reducing signal reflection and refraction.

6. Balanced(differential signal) audio output soldering pads are available.

7. The dedicated S/PDIF interface is newly added which supports up to 192kHz/24bit resolution via new Optical (Toslink) output.

- Ubuntu/Linux setup guide for ODROID-C2 : HERE / for ODROOID-C1+ : HERE
- Official Volumio 2 OS support : https://volumio.org

- Debain based DietPi : HERE
- PCB mechanical drawings (AutoCAD format) : Download HERE
- Schematics : Download HERE
 
 
201610081203409062.jpg Package include

- HiFi Shield 2 Board
 

BOARD DETAIL

The audio output is the other way as standard. Red : Left, White : Right
201610081156405325.jpg

HiFiShield2Boarddetailm.jpg

BLOCK DIAGRAM

HiFiShield2_BLOCKDIAGRAM.jpg

ODROID-C2 / C1+ 7PIN I2S PINMAP

ODROID-C2/C1+ 7pin Layout

HEADER

Label

1

GND

2

I2S Data In (for ADC)

3

5V

4

I2S MCLK (Master Clock)

5

I2S LRCLK (LR Clock)

6

I2S SCLK (Bit Clock)

7

I2S Data Out (for DAC)



The HiFi Shield 2 is a high-resolution Digital to Analog Converter(DAC) for the ODROID-C2 and ODROID-C1+. This is a special sound card for the C2 and C1+, that is optimized for the best fidelity audio playback quality. It delivers a nicely balanced sound, solid, deep, wide and nicely layered.  

We've analysed the the audio quality of the HiFi Shield 2 DAC output with the famous industry standard equipment, Audio Precision. The Audio Precision is a high performance audio analyser optimized for the digital audio product. 

The analog output of the HiFi Shield 2 is connected to the equipment and measurement data shows on the host PC.


Test conditions
Volumio 2.002 image runs on the Odroid-C2 with HiFi-Shield 2.  192KHz audio test files were used.
Audio Precision Input : Analog unbalanded 2ch, 600ohm

Hardware volume/mixer settings
Analogue : -6.00 dB (amixer -c 1 sset Analogue 0)
Digital : -3.00 dB (amixer -c 1 sset Digital 201)
Deemphasis Filter : On (amixer -c 1 sset Deemphasis on)

Software volume settings
Volumio UI volume : software volume 100 (maximum full scale)

 
Set-up with ODROID-VU5

HiFiShield2_5inchdisplay.jpg
 
Set-up with ODROID-3.5inch Touchscreen Shield

HiFiShield2smalldisplay.jpg
 
The Signal to Noise Ratio (SNR)

[HiFi2] Signal to Noise Ratio-1KHz.jpg
 

The Noise Level in dBm

[HiFi2] Noise Level-Silence-1.jpg


The Frequency Response and RMS output level in dBV

[HiFi2] Frequency sweep RMS Level-1.jpg
 

The Total Harmonic Distortion + Noise Ratio  (THD+N)

[HiFi2] THD+N Ratio-1KHz.jpg

 

The Frequency sweep THD+N Ratio 

[HiFi2] Frequency sweep THD+N Ratio.jpg

 
The FFT spectrum analyzer for 1Khz signal

[HiFi2] FFT-1KHz.jpg


This is a great idea if you want an audiophile set-up with ODROID-C2/C1+. Enjoy a variable output connecting directly into a power amp or active speakers. 
 

   Note: 

The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.

Please find more details here: Supplier warranty terms and conditions: https://www.hardkernel.com/agreement/

Write a review

Please login or register to review

HiFi Shield 2

  • Brand: Hardkernel
  • Product Code:Hdk-HiFi-Shield2
  • Reward Points:53
  • Availability:In Stock
  • रo 5,128.00

  • Price in reward points:5298

  • 3 or more रo 5,086.00
  • 5 or more रo 5,065.00
  • 13 or more रo 5,044.00
  • 25 or more रo 5,001.00

Related Products

HiFi Shield Plus

HiFi Shield Plus

Works with the ODROID-C2 / C1+. This is not compatible with the original ODROID-C1. The HiFi Sh..

रo 3,813.00

Tags: HiFi, Shield, 2

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments