• Your shopping cart is empty!

  • L293N Motor Driver Board
This is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control. The driver greatly simplifies and increases the ease with which you may control motors, relays, etc from microcontrollers. 
 
It can drive motors upto 36V with a total DC current of up to 600mA. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage.
 
This motor driver uses screw terminals for easy connections, mounting holes for easy mounting, back EMF protection circuit, onboard heatsink for better heat dissipation and more efficient performance.
 
This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc.
 
You may use this driver with our development boards to control DC and Stepper Motors. To use this driver with our development board, just connect the power pins on the driver to the power pins on the development board, and connect the drivers input pins to suitable IO pin on the development board. You may use our Female to Female - Jumper Wires to make the connections.
 
Features:
  • Maximum motor supply voltage: 36V
  • Maximum motor supply current: 600 mA per motor
  • Onboard Heatsink for better performance
  • The driver two holes of 3mm diameter for easy mounting

Pictures shown are for illustration purpose only.Actual product may vary

Write a review

Please login or register to review

L293N Motor Driver Board

  • Product Code:SP-L293N-Motor-Driver-Brd
  • Reward Points:2
  • Availability:In Stock

  • रo 85.00

  • Price in reward points:115

0 reviews / Write a review

Related Products

N20 DC Gear Motor

N20 DC Gear Motor

N20 DC Gear Motor of Miniature Low-speed Motor Robot Motor with Metal Gear Box  Specifications: ..

रo 360.00 रo 590.00

Motor 3V - 6V DC

Motor 3V - 6V DC

This is a small DC motor with a small circular shaft of diameter 2mm which measures about 8mm long. ..

रo 28.00

L298P 2A Motor Shield For Arduino

L298P 2A Motor Shield For Arduino

This  DFRobot Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC..

रo 1,183.00 रo 1,364.00

L293DNE / L293D : Dual H-Bridge IC

L293DNE / L293D : Dual H-Bridge IC

The L293DNE / L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or..

रo 55.00 रo 35.00

Stepper Motor BoosterPack featuring DRV8711 and CSD88537ND-Evaluation Kit

Stepper Motor BoosterPack featuring DRV8711 and CSD88537ND-Evaluation Kit

Description   The BOOST-DRV8711 is 8-52V, 4.5A, bipolar stepper motor drive stage based..

रo 3,558.00

5V DC Stepper Motor - 25BYJ48

5V DC Stepper Motor - 25BYJ48

This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torqu..

रo 231.00

DC Motor - 6V

DC Motor - 6V

This  6V DC Motors are ideal for hobby projects and science fair demonstrations. Specification f..

रo 35.00

Stepper motor - NEMA-17

Stepper motor - NEMA-17

12V 0.4A, 4-wire bipolar stepper motor with 200 steps/ revolution (1.8°/step). Features and Spec..

रo 1,060.00 रo 1,200.00

Grove - I2C Motor Driver

Grove - I2C Motor Driver

Grove I2C communication motor board..   Its heart is a dual channel H-bridge driver chip tha..

रo 1,978.00

4A Motor Shield

4A Motor Shield

The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control ind..

रo 4,619.00

1A Motor Shield for Arduino

1A Motor Shield for Arduino

1A Motor Shield for Arduino This Motor shield  for Arduino uses L293 chip which allow to dri..

रo 1,423.00 रo 1,639.00

Grove - Haptic Motor

Grove - Haptic Motor

Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more fe..

रo 1,672.00

Pololu 2267 NEMA 17 Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Pololu 2267 NEMA 17 Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each p..

रo 2,548.00

Pololu 2689/2268/2690 NEMA 17 Stepper Motor with 18/28/38 cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

Pololu 2689/2268/2690 NEMA 17 Stepper Motor with 18/28/38 cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase

This NEMA 17-size hybrid bipolar stepping motor has an integrated 18/28/38 cm threaded rod as its ou..

रo 6,802.00

Small Size and High Torque Stepper Motor - 24BYJ48

Small Size and High Torque Stepper Motor - 24BYJ48

Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Aut..

रo 511.00

Pololu 70 Tamiya 72001 Planetary Gearbox Kit

Pololu 70 Tamiya 72001 Planetary Gearbox Kit

The first in Tamiya’s “high efficiency” series, the planetary gearbox features two 4:1 and two 5:1 s..

रo 1,913.00

Pololu 4754 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder - 70:1

Pololu 4754 Metal Gearmotor 37Dx70L mm 12V with 64 CPR Encoder - 70:1

This gearmotor is a powerful 12V brushed DC motor with a 70:1 metal gearbox and an integrated quadra..

रo 4,473.00

Pololu 4750 / 4751 / 4752 / 4753 / 4755 / 4756 / 2828 Metal Gearmotors with 64 CPR Encoder (Helical Pinion)

Pololu 4750 / 4751 / 4752 / 4753 / 4755 / 4756 / 2828 Metal Gearmotors with 64 CPR Encoder (Helical Pinion)

This is the motor and encoder portion of our 37D x L mm metal gearmotors with 64 CPR encoders. It do..

रo 4,473.00

Pololu 2823 Metal Gearmotor 37Dx68L mm with 64 CPR Encoder

Pololu 2823 Metal Gearmotor 37Dx68L mm with 64 CPR Encoder

This gearmotor is a powerful 12V brushed DC motor with a 30:1 metal gearbox and an integrated quadra..

रo 2,986.00

Adafruit 2424 Automotive 2424 Gauge Stepper Motor - x27.168

Adafruit 2424 Automotive 2424 Gauge Stepper Motor - x27.168

This stepper motor is a little different than the large NEMA-17 types you may be used to. These are ..

रo 1,074.00

5V DC Stepper Motor - HN24BYJ01

5V DC Stepper Motor - HN24BYJ01

This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torqu..

रo 280.00

5V DC Stepper Motor - 28BYJ48

5V DC Stepper Motor - 28BYJ48

This is a 5V high torque stepper motor with more than 2000 steps per revolution. It has enough torqu..

रo 223.00

Adafruit 324 Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

Adafruit 324 Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step fo..

रo 1,511.00

BOOSTXL-ULN2003 — Dual Stepper Motor Driver BoosterPack featuring ULN2003 and CSD17571Q2 NexFET™

BOOSTXL-ULN2003 — Dual Stepper Motor Driver BoosterPack featuring ULN2003 and CSD17571Q2 NexFET™

The BOOSTXL-ULN2003 is 2A stepper motor driver kit which features TI's ULN2003A bipolar transistor a..

रo 3,720.00

Pololu 3036/3037/3038/3039/3040/3041/3042/3043/3044/3045/3046 Micro Metal Gearmotor HPCB 12V

Pololu 3036/3037/3038/3039/3040/3041/3042/3043/3044/3045/3046 Micro Metal Gearmotor HPCB 12V

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—..

रo 1,934.00

Quad DC Motor Driver Shield for Arduino

Quad DC Motor Driver Shield for Arduino

The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can con..

रo 1,195.00 रo 1,378.00

Tags: L293N, Motor, Driver, Board

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments