With 60Hz sample rates, reading speeds in excess of 900Hz and factory pre-calibration for every unit; tinyLiDAR is the highest performing VL53L0X based time-of-flight ranging module available.

 

 

Specifications:-

 

• Advanced Technology: Eye safe VCSEL Class 1 Laser
• Ultra Fast: up to 60Hz sample rates and up to approx 930Hz I2C reading rates even with an Arduino UNO
• Accurate: to 3% with mm precision
• Ultra Low Power: <3uA typ Quiescent Current in ULP SS mode at 2.8v supply
• Long Range: up to 2 meters
• Light Weight: approx 2.5g
• Easy to Parallel using I2C bus
• RoHS compliant, Lead-Free assembly
• Integrated level shifter for native 3v to 5v operation
• Remotely re-configurable I2C board address and operation modes
• On board non-volatile storage for I2C address, calibration and settings
• Several connector options including GROVE, SMD or standard 0.1 inch (2.54mm) header pins
• Blue activity LED to show measurement activity
• Hardware WatchDog Timer to automatically reboot tinyLiDAR if no I2C bus activity is seen in approx 3 seconds
• Ultrasonic Emulation mode to allow reads using any code meant for the common HC-SR04 or PING))) sensors
• Autonomous State Tracking, Object Detection and Real Time modes for ultra-low power IoT measurements

 

Cable:-

The connector on the backside is known as a “Grove” 4pin universal connector. Using a Grove cable makes experimenting with tinyLiDAR quicker, easier and neater.

• RoHS Compliant
• Connector Type: Latched / Buckled Grove to 4 pin Male Header Pins

Dimensions:-

 

• 21 x 25 x 8.3 mm
• Cable length: 20cm