WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors. The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios.
 
The ESP32 series of ICs are SOCs that integrate 2.4GHz Wi-Fi and Bluetooth dual-mode, with ultra-high radio frequency performance, stability, versatility, reliability, and ultra-low power consumption.
 
Features:
  • Support complete TCP/IP protocol stack
  • Rich wireless communication interface
  • Multiple working modes using through holes and half-pads
Specifications:
 
Wi-Fi RF Certifications FCC/CE/RoHS
Protocols
802.11 b/g/n/e/i(802.11n,Up to 150 Mbps)
A-MPDU and A-MSDU aggregation, 0.4_ s guard interval support
Frequency range 2.4~2.5 GHz
Bluetooth Protocols Bluetooth v4.2 BR/EDR and BLE standards
Radio NZIF receiver with -97 dBm sensitivity
Hardware Network port specifications RJ45, 10/100Mbps, Cross-direct connection adaptive
Serial baud rate 80~5000000
On-board flash 32Mbit
Operating voltage 5V or 3.3V
Operating current Average: 80mA
Supply current Minimum: 500 mA
Operating temperature -40°C~+85°C
Ambient temperature Normal temperature
Packaging Half pad/ Through-hole connector( Optional
Software Wi-Fi mode Station/softAP/SoftAP+station/P2P
Wi-Fi security mechanisms WPA/WPA2/WPA2-Enterprise/WPS
Encryption types AES/RSA/ECC/SHA
Firmware update Remote OTA upgrade via network
Software development SDK used for further development
Networking protocol IPv4, TCP/UDP
IP access methods Static IP,DHCP(Default)
Transparent transmission modes TCP Server/TCP Client/UDP Server/UDP Client
User configurations AT+ commands set
 
Package Includes:
  • 1 x Serial to Ethernet Module based on ESP32 series - WT32-ETH01

Write a review

Please login or register to review

Serial to Ethernet Module based on ESP32 series - WT32-ETH01

  • Product Code:Seeed-WT32-ETH01
  • Reward Points:20
  • Availability:In Stock
  • रo 2,040.00

  • Price in reward points:2040

  • 90 or more रo 1,934.00

Related Products

Adafruit 3201 Ethernet FeatherWing

Adafruit 3201 Ethernet FeatherWing

Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather boar..

रo 2,153.00

ESP32 Development board - WT32-SC01 with 320x480 capacitive multi-touch screen

ESP32 Development board - WT32-SC01 with 320x480 capacitive multi-touch screen

WT32-SC01 is an ESP32 Development board with a 3.5-inch color touch screen. The touch screen enables..

रo 4,652.00

Embedded Serial to Ethernet Module

Embedded Serial to Ethernet Module

This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gatewa..

रo 1,781.00 रo 2,053.00

Waveshare 20410 Ethernet to UART Converter for Raspberry Pi Pico

Waveshare 20410 Ethernet to UART Converter for Raspberry Pi Pico

Ethernet To UART Converter For Raspberry Pi Pico, 10/100M Ethernet, Enabling Network Communication T..

रo 885.00 रo 1,055.00

Tags: ESP32, Ethernet

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments