What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite lil chips, the ESP32-S2, and a uFL antenna port so you can connect any WiFi antenna for great range!

Note: This board does not come with an onboard antenna, you need a uFL connector antenna such as the 2.4GHz Mini Flexible WiFi Antenna or a uFL to RP-SMA adapter The antenna is not included in purchase. Almost all WiFi antennas are RP-SMA so watch out that you don't use a uFL to SMA adapter.

The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.

Please note the QT Py ESP32-S2 has a single-core 240 MHz chip, so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This ESP32-S2 mini-module we are using on the QT Py comes with 4 MB flash and 2 MB PSRAM so you can buffer massive JSON files for parsing!

OLEDs! Inertial Measurement Units! Sensors a-plenty. All plug-and-play thanks to the innovative chainable design: SparkFun Qwiic-compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Just plug in a compatible cable and attach it to your MCU of choice, and you’re ready to load up some software and measure some light. Seeed Grove I2C boards will also work with this adapter cable.

Pinout and shape are Seeed Xiao compatible, with castellated pads so you can solder it flat to a PCB. In addition to the QT connector, we also added an RGB NeoPixel (with controllable power pin to allow for ultra-low-power usage), a reset button (great for restarting your program or entering the bootloader), and a button on GPIO 0 for entering the ROM bootloader or for user input

Runs Arduino like a dream and CircuitPython projects are fantastically fun.

Features:

  • Same size, form-factor, and pin-out as Seeed Xiao
  • USB Type C connector - If you have only Micro B cables, this adapter will come in handy!
  • ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
  • 4 MB Flash & 2 MB PSRAM
  • Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, MIDI, Keyboard/Mouse HID, even a little disk drive for storing Python scripts.
  • Can be used with Arduino IDE or CircuitPython
  • Built-in RGB NeoPixel LED with power control to reduce quiescent power in deep sleep
  • Battery input pads on underside with diode protection for external battery packs up to 6V input
  • 13 GPIO pins:
  • 11 on breakout pads, 2 more on QT connector
  • 10 x 12-bit analog inputs (SPI high speed pads do not have analog inputs)
  • 8-bit analog output DAC
  • PWM outputs on any pin
  • Two I2C ports, one on the breakout pads, and another with STEMMA QT plug-n-play connector
  • Hardware UART
  • Hardware SPI on the high speed SPI peripheral puns
  • Hardware I2S on any pins
  • 5 x Capacitive Touch with no additional components required
  • 3.3V regulator with 600mA peak output
  • Deep sleep at 100uA
  • Reset switch for starting your project code over, boot 0 button for entering bootloader mode

Specifications:

  • Product Dimensions: 21.8mm x 17.9mm x 5.7mm / 0.9" x 0.7" x 0.2"
  • Product Weight: 2.1g / 0.1oz

Package Includes:

  • 1 x Adafruit 5348 QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port - STEMMA QT 

Write a review

Please login or register to review

Adafruit 5348 QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port-STEMMA QT- Coming Soon

  • Brand: Adafruit
  • Product Code:Ada-QT-py-ESP32-Antenna
  • Reward Points:14
  • Availability:In Stock
  • रo 1,349.00

  • Price in reward points:1423

  • 50 or more रo 1,180.00
  • 115 or more रo 1,176.00

Related Products

Adafruit 5716 ESP32-H2-MINI-1 Module - 4MB Flash (Coming Soon)

Adafruit 5716 ESP32-H2-MINI-1 Module - 4MB Flash (Coming Soon)

ESP32-H2-MINI-1 is a powerful, generic Bluetooth Low Energy and IEEE 802.15.4 combo module that has ..

रo 304.00

Adafruit 5405 QT Py ESP32-C3 WiFi Dev Board with STEMMA QT

Adafruit 5405 QT Py ESP32-C3 WiFi Dev Board with STEMMA QT

What's life without a little RISC? This miniature dev board is perfect for small projects: it comes ..

रo 1,075.00

FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth)

FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth)

FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet ..

रo 944.00 रo 1,088.00

wESP32

wESP32

The wESP32 is an ESP32-based core board with wired Ethernet connectivity and power over Ethernet (Po..

रo 6,733.00

Adafruit 5770 I2S Amplifier BFF Add-On for QT Py and Xiao

Adafruit 5770 I2S Amplifier BFF Add-On for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of powe..

रo 668.00

Adafruit 5747 TinyS3 ESP32-S3 with u.FL by Unexpected Maker

Adafruit 5747 TinyS3 ESP32-S3 with u.FL by Unexpected Maker

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! Now with..

रo 2,700.00

Adafruit 5426 QT Py ESP32-S3 WiFi Dev Board with STEMMA QT - 8 MB Flash / No PSRAM

Adafruit 5426 QT Py ESP32-S3 WiFi Dev Board with STEMMA QT - 8 MB Flash / No PSRAM

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful ne..

रo 1,350.00

Adafruit 5700 QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT

Adafruit 5700 QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful ne..

रo 1,350.00

Adafruit 5769 Audio BFF Add-on for QT Py and Xiao

Adafruit 5769 Audio BFF Add-on for QT Py and Xiao

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of powe..

रo 642.00

Adafruit 5397 LiIon or LiPoly Charger BFF Add-On for QT Py

Adafruit 5397 LiIon or LiPoly Charger BFF Add-On for QT Py

Is your QT Py all alone, lacking a friend to travel the wide world with? When you were a kid you may..

रo 534.00

Adafruit 5395 QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT - 8MB Flash 2MB PSRAM

Adafruit 5395 QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT - 8MB Flash 2MB PSRAM

This dev board is like when you're watching a super-hero movie and the protagonist shows up in a tot..

रo 1,615.00

Adafruit 5885 ESP32-S3 Feather 8MB with w.FL Antenna

Adafruit 5885 ESP32-S3 Feather 8MB with w.FL Antenna

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful ..

रo 1,889.00

Tags: ESP32-S2, STEMMA QT, Seeed Xiao, microcontroller

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments