An ESP32-S2 Feather board with a built in IPS TFT color display.It's got all the gooeyness of a mozzarella stick features of a Feather main board, the comforting warmth of an ESP32-S2 WiFi microcontroller, and the crispness of a 240x135 pixel color TFT display. All that and it will even plug in nicely into a breadboard, terminal block wing, or Feather Doubler or even just stack on top of another wing.

This feather comes with native USB and 4 MB flash + 2 MB of PSRAM, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.

The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.

Please note the Feather ESP32-S2 has a single-core 240 MHz chip, so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This ESP32-S2 mini-module we are using on the Feather comes with 4 MB flash and 2 MB PSRAM so you can buffer massive JSON files for parsing

The color TFT is connected to the SPI pins, and uses additional pins for control that are not exposed to the breakout pads. It's the same display as you see here, with 240x135 pixels and is IPS so you get bright color at any angle. The backlight is also connected to a separate pin so you can PWM the backlight up and down as desired.

For low power usages, the Feather has a second AP2112 regulator. The regulator is controlled with a GPIO pin on the enable line and can shut off power to the Stemma QT port and TFT. There is also a separate power pin for the NeoPixel that can be used to disable it for even lower quiescent power. With everything off and in deep sleep mode, the TFT feather uses about 100uA of current.


Features:

  • ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
  • Mini module has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
  • Color 1.14" IPS TFT with 240x135 pixels - bright and colorful display with ST7789 chipset that can be viewed at any angle angle.
  • Power options - USB type C or Lipoly battery
  • Built-in battery charging when powered over USB-C
  • LiPoly battery monitor - LC709203 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
  • Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
  • Serial debug output pin (optional, for checking the hardware serial debug console)
  • STEMMA QT connector for I2C devices, with switchable power, so you can go into low power mode.
  • On/Charge/User LEDs + status NeoPixel with pin-controlled power for low power usage
  • Low Power friendly! In deep sleep mode we can get down to 80~100uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external I2C/TFT power for the lowest quiescent current draw.
  • Works with Arduino or CircuitPython!

Specifications:

  • Product Dimensions: 52.4mm x 22.8mm x 7.2mm / 2.1" x 0.9" x 0.3"
  • Product Weight: 6.3g / 0.2oz

Package Includes:

  • 1 x Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

Write a review

Please login or register to review

Adafruit 5300 ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT

  • Brand: Adafruit
  • Product Code:Ada-ESP32-S2-TFT-Feather
  • Reward Points:28
  • Availability:In Stock
  • रo 2,693.00

  • Price in reward points:2841

  • 50 or more रo 2,357.00
  • 60 or more रo 2,347.00

Related Products

Adafruit 5650 Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver

Adafruit 5650 Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver

If there is one thing Adafruit is known for, its mega-blinky-fun-rainbow-LEDs. We just love sticking..

रo 1,565.00

Adafruit 2890 FeatherWing Doubler-Prototyping Add-on For All Feather Boards

Adafruit 2890 FeatherWing Doubler-Prototyping Add-on For All Feather Boards

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is simi..

रo 809.00

Adafruit 2926 Assembled Terminal Block Breakout FeatherWing

Adafruit 2926 Assembled Terminal Block Breakout FeatherWing

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg..

रo 1,614.00

Adafruit 5400 ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT

Adafruit 5400 ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM modu..

रo 1,908.00 रo 2,153.00

Adafruit 5345 ESP32-S2 Reverse TFT Feather

Adafruit 5345 ESP32-S2 Reverse TFT Feather

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly wh..

रo 2,695.00

Adafruit 5477 ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT / Qwiic

Adafruit 5477 ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT / Qwiic

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful ..

रo 1,890.00

Adafruit 5787 ESP32-C3-DevKit-RUST-1 - 4 MB Flash

Adafruit 5787 ESP32-C3-DevKit-RUST-1 - 4 MB Flash

ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1,..

रo 2,690.00

Adafruit 5500 Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM

Adafruit 5500 Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM

What's Metro-shaped and has an ESP32-S3 WiFi module? What has a STEMMA QT connector for I2C devices ..

रo 2,695.00

Adafruit 5438 ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM - STEMMA QT

Adafruit 5438 ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM - STEMMA QT

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM modu..

रo 2,153.00

Adafruit 5399 FeatherS3 - ESP32-S3 Development Board by Unexpected Maker

Adafruit 5399 FeatherS3 - ESP32-S3 Development Board by Unexpected Maker

The FeatherS3 ships with the latest version of CircuitPython with ESP32-S3 support.It also ships wit..

रo 2,732.00

Adafruit 5900 ESP32 Feather V2 with Headers - 8MB Flash + 2 MB PSRAM - STEMMA QT

Adafruit 5900 ESP32 Feather V2 with Headers - 8MB Flash + 2 MB PSRAM - STEMMA QT

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather. With the fabulous ESP32 WROOM modul..

रo 2,261.00

Tags: ESP32-S2, TFT color, WiFi, Microcontroller

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments