Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite microcontroller (like the ATmega328 or ATSAMD51), awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS/SSL encryption (it has root certificates pre-burned in).

  • Having WiFi managed by a separate chip means your code is simpler, you don't have to cache socket data, or compile in & debug an SSL library. Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer. You can use 3V or 5V Arduino, any chip from the ATmega328 or up, although the '328 will not be able to do very complex tasks or buffer a lot of data. It also works great with CircuitPython, a SAMD51/Cortex M4 minimum required since we need a bunch of RAM. All you need is an SPI bus and 2 control pins plus a power supply that can provide up to 250mA during WiFi usage.
  • We placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices. Comes fully assembled and tested, pre-programmed with ESP32 SPI WiFi co-processor firmware that you can use in CircuitPython to use this into a WiFi co-processsor over SPI + 2 pins. We also toss in some header so you can solder it in and plug into a solderless breadboard.

The firmware on board is a slight variant of the Arduino WiFiNINA core, which works great! At this time connection to Enterprise WiFi is not yet supported.

Check out our learning system guide for schematics, files, and to get started AirLift'in' within minutes!

Technical Details:

  • Product Dimensions: 33.0mm x 31.8mm x 4.8mm / 1.3" x 1.3" x 0.2"

Package Includes:

  • 1 x Adafruit 4201 AirLift – ESP32 WiFi Co-Processor Breakout Board 


Write a review

Please login or register to review

Adafruit 4201 AirLift – ESP32 WiFi Co-Processor Breakout Board

  • Brand: Adafruit
  • Product Code:NR-Ada-4201-AirLift-ESP32
  • Reward Points:11
  • Availability:In Stock
  • रo 1,075.00

  • Price in reward points:1135

  • 45 or more रo 940.00
  • 143 or more रo 936.00

Related Products

Adafruit 4264 AirLift FeatherWing – ESP32 WiFi Co-Processor

Adafruit 4264 AirLift FeatherWing – ESP32 WiFi Co-Processor

Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you..

रo 1,398.00

ESP32S Wifi Bluetooth Combo Module

ESP32S Wifi Bluetooth Combo Module

ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi ..

रo 375.00

ESP32 Development Board

ESP32 Development Board

GeeekNET ESP32 Development Board is made with the official WROOM32 module. There is built in USB-to-..

रo 2,394.00

Adafruit 4363 AirLift Bitsy Add-On – ESP32 WiFi Co-Processor

Adafruit 4363 AirLift Bitsy Add-On – ESP32 WiFi Co-Processor

Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that let..

रo 1,614.00

Adafruit 2999 ATWINC1500 WiFi Breakout

Adafruit 2999 ATWINC1500 WiFi Breakout

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 8..

रo 2,693.00

Adafruit 4285 AirLift Shield - ESP32 WiFi Co-Processor

Adafruit 4285 AirLift Shield - ESP32 WiFi Co-Processor

Give your Arduino project a lift with the Adafruit AirLift Shield - a shield that lets you use the p..

रo 1,430.00 रo 1,614.00

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Adafruit 3060 ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 8..

रo 2,693.00

Adafruit 4919 ESP32-S2 WROOM Module with PCB Antenna - 4 MB flash and no PSRAM - 4MB Flash

Adafruit 4919 ESP32-S2 WROOM Module with PCB Antenna - 4 MB flash and no PSRAM - 4MB Flash

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had e..

रo 351.00

UHF Reader Based on Pico W / ESP32

UHF Reader Based on Pico W / ESP32

Introducing the UHF Reader, the rapid Read/Write multi-tag reading device that is revolutionizing ho..

रo 8,413.00

Tags: Adafruit, AirLift, ESP32, WiFi, Breakout, Board

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments