The ODROID-SHOW is the Arduino compatible that lets you see what your ODROID or PC is thinking using a small 2.2” TFT LCD.
You can show colorful texts and pictures via USB interface with VT100/ANSI style commands without big HDMI monitor. You can connect this tiny display to your ODROID as well as Mac, Linux PC, Windows PC even an enterprise server.
The form factor is designed for stacking on the ODROID-U3 and it comes with some PCB spacers and a USB cable.
There are I2C, ADC, GPIO pins for further expansion. We will introduce an add-on board with some sensor chips.
You can make it portable device with on-board charger by adding a 750mAh Li-Po battery. Because of very low power consumption, this is very useful for Wearable projects.
The supplier of the product has no replacement and/or refund policy as part of their product warranty/guarantee. Furthermore, the repair cost and the cost of shipping to and fro from South Korea has to be borne. As Fab.to.Lab is merely an intermediary we extend the exact same warranty terms to all customers of Harkernel.
- ODROID-Show2 Board with 2.2inch TFT LCD Module
- 4 x 20mm PCB spacer (Plastic)
- 4 x 11mm PCB spacer (Metal)
- 4 x 10mm PCB spacer (Plastic)
- 1 x USB2.0 Type A to Micro-size Type B Cable
We highly recommend you to purchase 750mAh Battery together to make it portable
.
SPECIFICATION
MCU
ATmega328P at 16Mhz
LCD
2.2inch 240 x 320 TFT-LCD(SPI 8Mhz interface)
Host Interface
USB to UART via on-board CP2104
Input Voltage
3.7 ~ 5.5 Volt
Power Consumption
60mA @ 5Volt
Serial Port Settings
baud rate : 500,000 bps(0.5Mbps)
Stop bits : 8-N-1
No H/W, S/W Flow Control
